Disable Ethernet Hardware Devices at start-up
To startup vm called "sys-net" in Qubes on my laptop need to write "1" in file
echo -n "1" > /sys/bus/pci/devices/0000:04:00.0/remove
also 0000:04:00.0 and 0000:04:00.1 are conflicts and need to be removed first after every startup laptop.
then network start and work fine. there is some input for information
$ lspci | grep -i eth
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev12)
$ find /sys -name *04:00.0
/sys/bus/pci/devices/0000:04:00.0
/sys/bus/pci/drivers/rtsx_pci/0000:04:00.0
/sys/devices/pci0000:00/0000:00:1d.3/0000:04:00.0
$ find /sys -name *04:00.1
/sys/bus/pci/devices/0000:04:00.1
/sys/bus/pci/drivers/pciback/0000:04:00.1
/sys/devices/pci0000:00/0000:001d.3/0000:04:00.1
How can I convert it to systemd script to run it at start-up? It works only temporarily. After reboot the network device is there again.
systemd udev devices pci qubes
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
bumped to the homepage by Community♦ 2 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
To startup vm called "sys-net" in Qubes on my laptop need to write "1" in file
echo -n "1" > /sys/bus/pci/devices/0000:04:00.0/remove
also 0000:04:00.0 and 0000:04:00.1 are conflicts and need to be removed first after every startup laptop.
then network start and work fine. there is some input for information
$ lspci | grep -i eth
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev12)
$ find /sys -name *04:00.0
/sys/bus/pci/devices/0000:04:00.0
/sys/bus/pci/drivers/rtsx_pci/0000:04:00.0
/sys/devices/pci0000:00/0000:00:1d.3/0000:04:00.0
$ find /sys -name *04:00.1
/sys/bus/pci/devices/0000:04:00.1
/sys/bus/pci/drivers/pciback/0000:04:00.1
/sys/devices/pci0000:00/0000:001d.3/0000:04:00.1
How can I convert it to systemd script to run it at start-up? It works only temporarily. After reboot the network device is there again.
systemd udev devices pci qubes
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
bumped to the homepage by Community♦ 2 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15
add a comment |
To startup vm called "sys-net" in Qubes on my laptop need to write "1" in file
echo -n "1" > /sys/bus/pci/devices/0000:04:00.0/remove
also 0000:04:00.0 and 0000:04:00.1 are conflicts and need to be removed first after every startup laptop.
then network start and work fine. there is some input for information
$ lspci | grep -i eth
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev12)
$ find /sys -name *04:00.0
/sys/bus/pci/devices/0000:04:00.0
/sys/bus/pci/drivers/rtsx_pci/0000:04:00.0
/sys/devices/pci0000:00/0000:00:1d.3/0000:04:00.0
$ find /sys -name *04:00.1
/sys/bus/pci/devices/0000:04:00.1
/sys/bus/pci/drivers/pciback/0000:04:00.1
/sys/devices/pci0000:00/0000:001d.3/0000:04:00.1
How can I convert it to systemd script to run it at start-up? It works only temporarily. After reboot the network device is there again.
systemd udev devices pci qubes
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
To startup vm called "sys-net" in Qubes on my laptop need to write "1" in file
echo -n "1" > /sys/bus/pci/devices/0000:04:00.0/remove
also 0000:04:00.0 and 0000:04:00.1 are conflicts and need to be removed first after every startup laptop.
then network start and work fine. there is some input for information
$ lspci | grep -i eth
04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev12)
$ find /sys -name *04:00.0
/sys/bus/pci/devices/0000:04:00.0
/sys/bus/pci/drivers/rtsx_pci/0000:04:00.0
/sys/devices/pci0000:00/0000:00:1d.3/0000:04:00.0
$ find /sys -name *04:00.1
/sys/bus/pci/devices/0000:04:00.1
/sys/bus/pci/drivers/pciback/0000:04:00.1
/sys/devices/pci0000:00/0000:001d.3/0000:04:00.1
How can I convert it to systemd script to run it at start-up? It works only temporarily. After reboot the network device is there again.
systemd udev devices pci qubes
systemd udev devices pci qubes
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
edited Mar 26 '17 at 9:23
ILMostro_7
1,5181322
1,5181322
asked Mar 25 '17 at 18:55
nickaznickaz
61
asked Mar 25 '17 at 18:55
nickaznickaz
61
asked Mar 25 '17 at 18:55
nickaznickaz
61
61
bumped to the homepage by Community♦ 2 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 2 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15
add a comment |
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15
add a comment |
1 Answer
1
active
oldest
votes
You could try using a udev rule.
For example, you can create a file /etc/udev/rules.d/99-disable-eth.rules with the following content:
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", RUN+="/bin/sh -c 'echo 1 >/sys/bus/pci/devices/0000:04:00.0/remove'"
Feel free to customize it further to add more specific items, like the vendor attribute, the name of the interface, etc.
Take a look at http://www.reactivated.net/writing_udev_rules.html for more examples and additional information on writing udev rules.
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f353851%2fdisable-ethernet-hardware-devices-at-start-up%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You could try using a udev rule.
For example, you can create a file /etc/udev/rules.d/99-disable-eth.rules with the following content:
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", RUN+="/bin/sh -c 'echo 1 >/sys/bus/pci/devices/0000:04:00.0/remove'"
Feel free to customize it further to add more specific items, like the vendor attribute, the name of the interface, etc.
Take a look at http://www.reactivated.net/writing_udev_rules.html for more examples and additional information on writing udev rules.
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
add a comment |
You could try using a udev rule.
For example, you can create a file /etc/udev/rules.d/99-disable-eth.rules with the following content:
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", RUN+="/bin/sh -c 'echo 1 >/sys/bus/pci/devices/0000:04:00.0/remove'"
Feel free to customize it further to add more specific items, like the vendor attribute, the name of the interface, etc.
Take a look at http://www.reactivated.net/writing_udev_rules.html for more examples and additional information on writing udev rules.
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
add a comment |
You could try using a udev rule.
For example, you can create a file /etc/udev/rules.d/99-disable-eth.rules with the following content:
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", RUN+="/bin/sh -c 'echo 1 >/sys/bus/pci/devices/0000:04:00.0/remove'"
Feel free to customize it further to add more specific items, like the vendor attribute, the name of the interface, etc.
Take a look at http://www.reactivated.net/writing_udev_rules.html for more examples and additional information on writing udev rules.
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
You could try using a udev rule.
For example, you can create a file /etc/udev/rules.d/99-disable-eth.rules with the following content:
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="pci", RUN+="/bin/sh -c 'echo 1 >/sys/bus/pci/devices/0000:04:00.0/remove'"
Feel free to customize it further to add more specific items, like the vendor attribute, the name of the interface, etc.
Take a look at http://www.reactivated.net/writing_udev_rules.html for more examples and additional information on writing udev rules.
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
answered Mar 26 '17 at 7:06
ILMostro_7ILMostro_7
1,5181322
1,5181322
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f353851%2fdisable-ethernet-hardware-devices-at-start-up%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
0000:04:00.0 - its a mmc0 ultra high speed SDR104 SDHC card
– nickaz
Mar 25 '17 at 19:15