CentOS 7. SSH Permission denied. Why no password?
I have a frustrating SSH access problem on a new VM with Centos 7 which is driving me crazy!! It seems to be a first-time login problem on the new box.
I know all the basic settings ... this is about the 5th VM I have set up with this OS (So ifcfg.eth0, hostname, network etc is all good).
I can ping the new box as well ... remotely and from it to other boxes in the network. But ...
When I attempt remote SSH access I just keep getting the error:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic)
I have seen this before and know about /etc/ssh/ssh_config ... and we are just talking password authentication here (not ssh key login). But only on this box I am getting it. I started off with just:
host *
GSSAPIAuthentication yes
This is what I used on the other machines and it always worked!
So, I have since tried uncommenting these keys:
#PasswordAuthentication yes
and
#PermitRootLogin yes
Above because I am logging in with root. And ... I also tried commenting out GSSAPIAuthentication. And yes ... I always restart the sshd daemon after making changes to this file (systemctl restart sshd.services)
Also ... I see nothing significant in /var/log/messages or /var/log/secure .. I've tried verbose using the ssh -v switch and what I do notice on this problem box is that shortly before the above "Permission denied" error is output I get this message:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
Whereas on other boxes which work I always get this:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
So clearly password authentication is not enabled !
The final straw is this: I get this same error message EVEN WHEN I SSH FROM THIS BOX TO ITSELF! There HAS to be some SSH setting I am missing.
Can someone please advise me what this setting is?
centos sshd
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
bumped to the homepage by Community♦ 30 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
|
show 1 more comment
I have a frustrating SSH access problem on a new VM with Centos 7 which is driving me crazy!! It seems to be a first-time login problem on the new box.
I know all the basic settings ... this is about the 5th VM I have set up with this OS (So ifcfg.eth0, hostname, network etc is all good).
I can ping the new box as well ... remotely and from it to other boxes in the network. But ...
When I attempt remote SSH access I just keep getting the error:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic)
I have seen this before and know about /etc/ssh/ssh_config ... and we are just talking password authentication here (not ssh key login). But only on this box I am getting it. I started off with just:
host *
GSSAPIAuthentication yes
This is what I used on the other machines and it always worked!
So, I have since tried uncommenting these keys:
#PasswordAuthentication yes
and
#PermitRootLogin yes
Above because I am logging in with root. And ... I also tried commenting out GSSAPIAuthentication. And yes ... I always restart the sshd daemon after making changes to this file (systemctl restart sshd.services)
Also ... I see nothing significant in /var/log/messages or /var/log/secure .. I've tried verbose using the ssh -v switch and what I do notice on this problem box is that shortly before the above "Permission denied" error is output I get this message:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
Whereas on other boxes which work I always get this:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
So clearly password authentication is not enabled !
The final straw is this: I get this same error message EVEN WHEN I SSH FROM THIS BOX TO ITSELF! There HAS to be some SSH setting I am missing.
Can someone please advise me what this setting is?
centos sshd
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
bumped to the homepage by Community♦ 30 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Hi, and welcome. Did you restartsshdafter modifying the configuration file?
– Andy Dalton
Aug 23 '18 at 14:18
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Please edit your question to include the contents of yoursshd_configfile (or at least the relevant parts), instead of describing what's in it and what you changed.
– Kenster
Aug 23 '18 at 14:57
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30
|
show 1 more comment
I have a frustrating SSH access problem on a new VM with Centos 7 which is driving me crazy!! It seems to be a first-time login problem on the new box.
I know all the basic settings ... this is about the 5th VM I have set up with this OS (So ifcfg.eth0, hostname, network etc is all good).
I can ping the new box as well ... remotely and from it to other boxes in the network. But ...
When I attempt remote SSH access I just keep getting the error:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic)
I have seen this before and know about /etc/ssh/ssh_config ... and we are just talking password authentication here (not ssh key login). But only on this box I am getting it. I started off with just:
host *
GSSAPIAuthentication yes
This is what I used on the other machines and it always worked!
So, I have since tried uncommenting these keys:
#PasswordAuthentication yes
and
#PermitRootLogin yes
Above because I am logging in with root. And ... I also tried commenting out GSSAPIAuthentication. And yes ... I always restart the sshd daemon after making changes to this file (systemctl restart sshd.services)
Also ... I see nothing significant in /var/log/messages or /var/log/secure .. I've tried verbose using the ssh -v switch and what I do notice on this problem box is that shortly before the above "Permission denied" error is output I get this message:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
Whereas on other boxes which work I always get this:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
So clearly password authentication is not enabled !
The final straw is this: I get this same error message EVEN WHEN I SSH FROM THIS BOX TO ITSELF! There HAS to be some SSH setting I am missing.
Can someone please advise me what this setting is?
centos sshd
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
I have a frustrating SSH access problem on a new VM with Centos 7 which is driving me crazy!! It seems to be a first-time login problem on the new box.
I know all the basic settings ... this is about the 5th VM I have set up with this OS (So ifcfg.eth0, hostname, network etc is all good).
I can ping the new box as well ... remotely and from it to other boxes in the network. But ...
When I attempt remote SSH access I just keep getting the error:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic)
I have seen this before and know about /etc/ssh/ssh_config ... and we are just talking password authentication here (not ssh key login). But only on this box I am getting it. I started off with just:
host *
GSSAPIAuthentication yes
This is what I used on the other machines and it always worked!
So, I have since tried uncommenting these keys:
#PasswordAuthentication yes
and
#PermitRootLogin yes
Above because I am logging in with root. And ... I also tried commenting out GSSAPIAuthentication. And yes ... I always restart the sshd daemon after making changes to this file (systemctl restart sshd.services)
Also ... I see nothing significant in /var/log/messages or /var/log/secure .. I've tried verbose using the ssh -v switch and what I do notice on this problem box is that shortly before the above "Permission denied" error is output I get this message:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
Whereas on other boxes which work I always get this:
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
So clearly password authentication is not enabled !
The final straw is this: I get this same error message EVEN WHEN I SSH FROM THIS BOX TO ITSELF! There HAS to be some SSH setting I am missing.
Can someone please advise me what this setting is?
centos sshd
centos sshd
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
asked Aug 23 '18 at 13:57
Paul CartierPaul Cartier
11
11
bumped to the homepage by Community♦ 30 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 30 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Hi, and welcome. Did you restartsshdafter modifying the configuration file?
– Andy Dalton
Aug 23 '18 at 14:18
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Please edit your question to include the contents of yoursshd_configfile (or at least the relevant parts), instead of describing what's in it and what you changed.
– Kenster
Aug 23 '18 at 14:57
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30
|
show 1 more comment
Hi, and welcome. Did you restartsshdafter modifying the configuration file?
– Andy Dalton
Aug 23 '18 at 14:18
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Please edit your question to include the contents of yoursshd_configfile (or at least the relevant parts), instead of describing what's in it and what you changed.
– Kenster
Aug 23 '18 at 14:57
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30
Hi, and welcome. Did you restart
sshd after modifying the configuration file?– Andy Dalton
Aug 23 '18 at 14:18
Hi, and welcome. Did you restart
sshd after modifying the configuration file?– Andy Dalton
Aug 23 '18 at 14:18
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Please edit your question to include the contents of your
sshd_config file (or at least the relevant parts), instead of describing what's in it and what you changed.– Kenster
Aug 23 '18 at 14:57
Please edit your question to include the contents of your
sshd_config file (or at least the relevant parts), instead of describing what's in it and what you changed.– Kenster
Aug 23 '18 at 14:57
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30
|
show 1 more comment
1 Answer
1
active
oldest
votes
You commented out the password authentication. Therefore, openSSH is not accepting passwords as an authentication measure. The same applies to root login.
Remove the # on the lines
PasswordAuthentication yes
PermitRootLogin yes
Then restart the service.
answered Aug 23 '18 at 14:20
PankiPanki
694311
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f464409%2fcentos-7-ssh-permission-denied-why-no-password%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You commented out the password authentication. Therefore, openSSH is not accepting passwords as an authentication measure. The same applies to root login.
Remove the # on the lines
PasswordAuthentication yes
PermitRootLogin yes
Then restart the service.
answered Aug 23 '18 at 14:20
PankiPanki
694311
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
add a comment |
You commented out the password authentication. Therefore, openSSH is not accepting passwords as an authentication measure. The same applies to root login.
Remove the # on the lines
PasswordAuthentication yes
PermitRootLogin yes
Then restart the service.
answered Aug 23 '18 at 14:20
PankiPanki
694311
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
add a comment |
You commented out the password authentication. Therefore, openSSH is not accepting passwords as an authentication measure. The same applies to root login.
Remove the # on the lines
PasswordAuthentication yes
PermitRootLogin yes
Then restart the service.
answered Aug 23 '18 at 14:20
PankiPanki
694311
You commented out the password authentication. Therefore, openSSH is not accepting passwords as an authentication measure. The same applies to root login.
Remove the # on the lines
PasswordAuthentication yes
PermitRootLogin yes
Then restart the service.
answered Aug 23 '18 at 14:20
PankiPanki
694311
answered Aug 23 '18 at 14:20
PankiPanki
694311
answered Aug 23 '18 at 14:20
PankiPanki
694311
answered Aug 23 '18 at 14:20
PankiPanki
694311
694311
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
add a comment |
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
I did uncomment them. See above: "I have since tried uncommenting these keys:" And .. I did restart sshd ... also above "And yes ... I always restart the sshd daemon after making changes to this file" In fact I've started sshd, networking and the entire VM many many times :-)
– Paul Cartier
Aug 23 '18 at 14:24
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f464409%2fcentos-7-ssh-permission-denied-why-no-password%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Hi, and welcome. Did you restart
sshdafter modifying the configuration file?– Andy Dalton
Aug 23 '18 at 14:18
Make sure you are writing those lines (PasswordAuthentication yes and PermitRootLogin yes) in /etc/ssh/sshd_config, and not the ssh_config. I notice you mentioning ssh_config in your question. If you are doing this right, it should work after restarting ssh service.
– Vinod
Aug 23 '18 at 14:50
Please edit your question to include the contents of your
sshd_configfile (or at least the relevant parts), instead of describing what's in it and what you changed.– Kenster
Aug 23 '18 at 14:57
What is tbe exact command that you are using to log into the Centos 7 machine?
– Nasir Riley
Aug 23 '18 at 17:36
I am using this: ssh root@centoshost ... at least most of the time. But I have also used the -i switch to indicate path to pubkey. And of course the -v sometimes to get verbose
– Paul Cartier
Aug 23 '18 at 18:30