azap from LinuxTV dvb-apps strange signal behavior with Hauppauge WinTV-HVR 950Q
What I want to do
I have a Hauppauge WinTV-HVR 950Q USB-TV-Stick. I want to use this stick to successively tune to and read in a certain live TV stream.
What I do
I trigger a scan and save the scan results in a file. I call it channels.conf, like the v4l documentary proposes.
scan /home/username/Documents/dvb/atsc/us-CA-SF-Bay-Area > /home/username/Documents/dvb/atsc/conf/home_channels.conf
Everything works fine, the scan returns something like this(A correct channel file):
[0003]:503000000:8VSB:49:52:3
[0005]:503000000:8VSB:81:84:5
[0006]:503000000:8VSB:97:100:6
26 San Francisco, CA:551000000:8VSB:49:52:3
26 San Francisco, CA:551000000:8VSB:65:68:4
KTSF-D3:551000000:8VSB:81:84:5
KTSF-D4:551000000:8VSB:97:100:6
KTSF-D5:551000000:8VSB:113:116:7
KTSF-D6:551000000:8VSB:129:132:8
KPIX-DT:563000000:8VSB:49:52:1
KKPX ION:635000000:8VSB:49:52:3
KKPX qubo:635000000:8VSB:65:68:4
IONLife:635000000:8VSB:81:84:5
100:635000000:8VSB:487:488:100
200:635000000:8VSB:417:418:200
201:635000000:8VSB:422:423:201
202:635000000:8VSB:427:428:202
203:635000000:8VSB:432:433:203
204:635000000:8VSB:412:413:204
300:635000000:8VSB:442:443:300
400:635000000:8VSB:457:458:400
KSTS-HD:683000000:8VSB:49:52:3
Telemundo Exitos TV:683000000:8VSB:65:68:4
CNL-SOI:683000000:8VSB:81:84:5
KQEH:689000000:8VSB:49:52:1
KQED:689000000:8VSB:65:68:2
LIFE:689000000:8VSB:81:84:3
KIDS:689000000:8VSB:97:100:4
V-me:689000000:8VSB:113:116:5
Then I tune to a channel from the scan results. KIDS for example:
azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
What I expect the program to do:
I expect the program to be tuned and to deliver results similar to this:
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
What it does:
In 2 out of 5 tries the azap just doesn't work at all.
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00c2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The rest of the time it generally works initially, then switches the status to 00 and can not be used any more, even if there is incoming signal.
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00c8 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The output even shows that there is high signal to noise ratio, low or rather no block errors or uncorrected errors at all at first, then it
This keeps me wondering since I see no reason for the program to switch. After double checking with a real TV I am very sure that I always have an incoming signal and that there should not be any reasons for a behavior like this.
Question
Can any of you guys see a reason for this behavior, could it be a problem with the Hardware that I'm using or rather a Software issue? Did anybody experience the same issues, how did you fix it? Any help is greatly appreciated!
linux hardware video
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
bumped to the homepage by Community♦ 1 hour ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from stackoverflow.com Feb 27 '12 at 19:37
This question came from our site for professional and enthusiast programmers.
add a comment |
What I want to do
I have a Hauppauge WinTV-HVR 950Q USB-TV-Stick. I want to use this stick to successively tune to and read in a certain live TV stream.
What I do
I trigger a scan and save the scan results in a file. I call it channels.conf, like the v4l documentary proposes.
scan /home/username/Documents/dvb/atsc/us-CA-SF-Bay-Area > /home/username/Documents/dvb/atsc/conf/home_channels.conf
Everything works fine, the scan returns something like this(A correct channel file):
[0003]:503000000:8VSB:49:52:3
[0005]:503000000:8VSB:81:84:5
[0006]:503000000:8VSB:97:100:6
26 San Francisco, CA:551000000:8VSB:49:52:3
26 San Francisco, CA:551000000:8VSB:65:68:4
KTSF-D3:551000000:8VSB:81:84:5
KTSF-D4:551000000:8VSB:97:100:6
KTSF-D5:551000000:8VSB:113:116:7
KTSF-D6:551000000:8VSB:129:132:8
KPIX-DT:563000000:8VSB:49:52:1
KKPX ION:635000000:8VSB:49:52:3
KKPX qubo:635000000:8VSB:65:68:4
IONLife:635000000:8VSB:81:84:5
100:635000000:8VSB:487:488:100
200:635000000:8VSB:417:418:200
201:635000000:8VSB:422:423:201
202:635000000:8VSB:427:428:202
203:635000000:8VSB:432:433:203
204:635000000:8VSB:412:413:204
300:635000000:8VSB:442:443:300
400:635000000:8VSB:457:458:400
KSTS-HD:683000000:8VSB:49:52:3
Telemundo Exitos TV:683000000:8VSB:65:68:4
CNL-SOI:683000000:8VSB:81:84:5
KQEH:689000000:8VSB:49:52:1
KQED:689000000:8VSB:65:68:2
LIFE:689000000:8VSB:81:84:3
KIDS:689000000:8VSB:97:100:4
V-me:689000000:8VSB:113:116:5
Then I tune to a channel from the scan results. KIDS for example:
azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
What I expect the program to do:
I expect the program to be tuned and to deliver results similar to this:
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
What it does:
In 2 out of 5 tries the azap just doesn't work at all.
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00c2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The rest of the time it generally works initially, then switches the status to 00 and can not be used any more, even if there is incoming signal.
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00c8 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The output even shows that there is high signal to noise ratio, low or rather no block errors or uncorrected errors at all at first, then it
This keeps me wondering since I see no reason for the program to switch. After double checking with a real TV I am very sure that I always have an incoming signal and that there should not be any reasons for a behavior like this.
Question
Can any of you guys see a reason for this behavior, could it be a problem with the Hardware that I'm using or rather a Software issue? Did anybody experience the same issues, how did you fix it? Any help is greatly appreciated!
linux hardware video
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
bumped to the homepage by Community♦ 1 hour ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from stackoverflow.com Feb 27 '12 at 19:37
This question came from our site for professional and enthusiast programmers.
add a comment |
What I want to do
I have a Hauppauge WinTV-HVR 950Q USB-TV-Stick. I want to use this stick to successively tune to and read in a certain live TV stream.
What I do
I trigger a scan and save the scan results in a file. I call it channels.conf, like the v4l documentary proposes.
scan /home/username/Documents/dvb/atsc/us-CA-SF-Bay-Area > /home/username/Documents/dvb/atsc/conf/home_channels.conf
Everything works fine, the scan returns something like this(A correct channel file):
[0003]:503000000:8VSB:49:52:3
[0005]:503000000:8VSB:81:84:5
[0006]:503000000:8VSB:97:100:6
26 San Francisco, CA:551000000:8VSB:49:52:3
26 San Francisco, CA:551000000:8VSB:65:68:4
KTSF-D3:551000000:8VSB:81:84:5
KTSF-D4:551000000:8VSB:97:100:6
KTSF-D5:551000000:8VSB:113:116:7
KTSF-D6:551000000:8VSB:129:132:8
KPIX-DT:563000000:8VSB:49:52:1
KKPX ION:635000000:8VSB:49:52:3
KKPX qubo:635000000:8VSB:65:68:4
IONLife:635000000:8VSB:81:84:5
100:635000000:8VSB:487:488:100
200:635000000:8VSB:417:418:200
201:635000000:8VSB:422:423:201
202:635000000:8VSB:427:428:202
203:635000000:8VSB:432:433:203
204:635000000:8VSB:412:413:204
300:635000000:8VSB:442:443:300
400:635000000:8VSB:457:458:400
KSTS-HD:683000000:8VSB:49:52:3
Telemundo Exitos TV:683000000:8VSB:65:68:4
CNL-SOI:683000000:8VSB:81:84:5
KQEH:689000000:8VSB:49:52:1
KQED:689000000:8VSB:65:68:2
LIFE:689000000:8VSB:81:84:3
KIDS:689000000:8VSB:97:100:4
V-me:689000000:8VSB:113:116:5
Then I tune to a channel from the scan results. KIDS for example:
azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
What I expect the program to do:
I expect the program to be tuned and to deliver results similar to this:
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
What it does:
In 2 out of 5 tries the azap just doesn't work at all.
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00c2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The rest of the time it generally works initially, then switches the status to 00 and can not be used any more, even if there is incoming signal.
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00c8 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The output even shows that there is high signal to noise ratio, low or rather no block errors or uncorrected errors at all at first, then it
This keeps me wondering since I see no reason for the program to switch. After double checking with a real TV I am very sure that I always have an incoming signal and that there should not be any reasons for a behavior like this.
Question
Can any of you guys see a reason for this behavior, could it be a problem with the Hardware that I'm using or rather a Software issue? Did anybody experience the same issues, how did you fix it? Any help is greatly appreciated!
linux hardware video
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
What I want to do
I have a Hauppauge WinTV-HVR 950Q USB-TV-Stick. I want to use this stick to successively tune to and read in a certain live TV stream.
What I do
I trigger a scan and save the scan results in a file. I call it channels.conf, like the v4l documentary proposes.
scan /home/username/Documents/dvb/atsc/us-CA-SF-Bay-Area > /home/username/Documents/dvb/atsc/conf/home_channels.conf
Everything works fine, the scan returns something like this(A correct channel file):
[0003]:503000000:8VSB:49:52:3
[0005]:503000000:8VSB:81:84:5
[0006]:503000000:8VSB:97:100:6
26 San Francisco, CA:551000000:8VSB:49:52:3
26 San Francisco, CA:551000000:8VSB:65:68:4
KTSF-D3:551000000:8VSB:81:84:5
KTSF-D4:551000000:8VSB:97:100:6
KTSF-D5:551000000:8VSB:113:116:7
KTSF-D6:551000000:8VSB:129:132:8
KPIX-DT:563000000:8VSB:49:52:1
KKPX ION:635000000:8VSB:49:52:3
KKPX qubo:635000000:8VSB:65:68:4
IONLife:635000000:8VSB:81:84:5
100:635000000:8VSB:487:488:100
200:635000000:8VSB:417:418:200
201:635000000:8VSB:422:423:201
202:635000000:8VSB:427:428:202
203:635000000:8VSB:432:433:203
204:635000000:8VSB:412:413:204
300:635000000:8VSB:442:443:300
400:635000000:8VSB:457:458:400
KSTS-HD:683000000:8VSB:49:52:3
Telemundo Exitos TV:683000000:8VSB:65:68:4
CNL-SOI:683000000:8VSB:81:84:5
KQEH:689000000:8VSB:49:52:1
KQED:689000000:8VSB:65:68:2
LIFE:689000000:8VSB:81:84:3
KIDS:689000000:8VSB:97:100:4
V-me:689000000:8VSB:113:116:5
Then I tune to a channel from the scan results. KIDS for example:
azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
What I expect the program to do:
I expect the program to be tuned and to deliver results similar to this:
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
What it does:
In 2 out of 5 tries the azap just doesn't work at all.
username@username:~$ azap -r -c Documents/dvb/atsc/conf/channels.conf KIDS
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 689000000 Hz
video pid 0x0061, audio pid 0x0064
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00c2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 0000 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The rest of the time it generally works initially, then switches the status to 00 and can not be used any more, even if there is incoming signal.
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00c8 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00d2 | snr 00d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00dc | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00e6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 00 | signal 00e6 | snr 00dc | ber 00000000 | unc 00000000 | FE_HAS_LOCK
...
The output even shows that there is high signal to noise ratio, low or rather no block errors or uncorrected errors at all at first, then it
This keeps me wondering since I see no reason for the program to switch. After double checking with a real TV I am very sure that I always have an incoming signal and that there should not be any reasons for a behavior like this.
Question
Can any of you guys see a reason for this behavior, could it be a problem with the Hardware that I'm using or rather a Software issue? Did anybody experience the same issues, how did you fix it? Any help is greatly appreciated!
linux hardware video
linux hardware video
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
edited Feb 27 '12 at 23:07
Gilles
539k12810891606
539k12810891606
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
asked Feb 27 '12 at 19:32
mmomentmmoment
1133
1133
bumped to the homepage by Community♦ 1 hour ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 1 hour ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from stackoverflow.com Feb 27 '12 at 19:37
This question came from our site for professional and enthusiast programmers.
migrated from stackoverflow.com Feb 27 '12 at 19:37
This question came from our site for professional and enthusiast programmers.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Did you try using the atsc initial tuning data?
$ head -n 20 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
# US ATSC center frequencies, use if in doubt
A 57028615 8VSB
A 63028615 8VSB
A 69028615 8VSB
A 79028615 8VSB
A 85028615 8VSB
A 177028615 8VSB
A 183028615 8VSB
A 189028615 8VSB
A 195028615 8VSB
A 201028615 8VSB
A 207028615 8VSB
A 213028615 8VSB
A 473028615 8VSB
A 479028615 8VSB
A 485028615 8VSB
A 491028615 8VSB
A 497028615 8VSB
A 503028615 8VSB
How does it behave using vlc to tune?
vlc atsc://frequency=689028615 :dvb-adapter=0
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f32863%2fazap-from-linuxtv-dvb-apps-strange-signal-behavior-with-hauppauge-wintv-hvr-950q%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Did you try using the atsc initial tuning data?
$ head -n 20 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
# US ATSC center frequencies, use if in doubt
A 57028615 8VSB
A 63028615 8VSB
A 69028615 8VSB
A 79028615 8VSB
A 85028615 8VSB
A 177028615 8VSB
A 183028615 8VSB
A 189028615 8VSB
A 195028615 8VSB
A 201028615 8VSB
A 207028615 8VSB
A 213028615 8VSB
A 473028615 8VSB
A 479028615 8VSB
A 485028615 8VSB
A 491028615 8VSB
A 497028615 8VSB
A 503028615 8VSB
How does it behave using vlc to tune?
vlc atsc://frequency=689028615 :dvb-adapter=0
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
add a comment |
Did you try using the atsc initial tuning data?
$ head -n 20 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
# US ATSC center frequencies, use if in doubt
A 57028615 8VSB
A 63028615 8VSB
A 69028615 8VSB
A 79028615 8VSB
A 85028615 8VSB
A 177028615 8VSB
A 183028615 8VSB
A 189028615 8VSB
A 195028615 8VSB
A 201028615 8VSB
A 207028615 8VSB
A 213028615 8VSB
A 473028615 8VSB
A 479028615 8VSB
A 485028615 8VSB
A 491028615 8VSB
A 497028615 8VSB
A 503028615 8VSB
How does it behave using vlc to tune?
vlc atsc://frequency=689028615 :dvb-adapter=0
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
add a comment |
Did you try using the atsc initial tuning data?
$ head -n 20 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
# US ATSC center frequencies, use if in doubt
A 57028615 8VSB
A 63028615 8VSB
A 69028615 8VSB
A 79028615 8VSB
A 85028615 8VSB
A 177028615 8VSB
A 183028615 8VSB
A 189028615 8VSB
A 195028615 8VSB
A 201028615 8VSB
A 207028615 8VSB
A 213028615 8VSB
A 473028615 8VSB
A 479028615 8VSB
A 485028615 8VSB
A 491028615 8VSB
A 497028615 8VSB
A 503028615 8VSB
How does it behave using vlc to tune?
vlc atsc://frequency=689028615 :dvb-adapter=0
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
Did you try using the atsc initial tuning data?
$ head -n 20 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
# US ATSC center frequencies, use if in doubt
A 57028615 8VSB
A 63028615 8VSB
A 69028615 8VSB
A 79028615 8VSB
A 85028615 8VSB
A 177028615 8VSB
A 183028615 8VSB
A 189028615 8VSB
A 195028615 8VSB
A 201028615 8VSB
A 207028615 8VSB
A 213028615 8VSB
A 473028615 8VSB
A 479028615 8VSB
A 485028615 8VSB
A 491028615 8VSB
A 497028615 8VSB
A 503028615 8VSB
How does it behave using vlc to tune?
vlc atsc://frequency=689028615 :dvb-adapter=0
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
edited Mar 4 '12 at 7:51
Mat
39.5k8121127
39.5k8121127
answered Mar 3 '12 at 19:34
billbill
1
answered Mar 3 '12 at 19:34
billbill
1
answered Mar 3 '12 at 19:34
billbill
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f32863%2fazap-from-linuxtv-dvb-apps-strange-signal-behavior-with-hauppauge-wintv-hvr-950q%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
