Routing traffic with multiple NICs on Ubuntu
I currently have a workstation set up with two NICs on separate networks.
My current setup is this:
eth0: LAN
eth1: Outside internet
I have a default gateway set up on eth1 to reach the outside internet. I also have a route in place to set the default gateway for the LAN on eth0. I can browse the internet as well as reach the local LAN with no problems. The issue I'm having is that when I try to access the Ubuntu machine from another machine on the LAN, the packets are coming in on eth0 but leaving on eth1. How can I set up a rule that ensures that all traffic for the LAN subnet ignores eth1?
routing
edited Mar 23 '16 at 18:31
mkomarinski
533211
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from serverfault.com Mar 23 '16 at 17:28
This question came from our site for system and network administrators.
add a comment |
I currently have a workstation set up with two NICs on separate networks.
My current setup is this:
eth0: LAN
eth1: Outside internet
I have a default gateway set up on eth1 to reach the outside internet. I also have a route in place to set the default gateway for the LAN on eth0. I can browse the internet as well as reach the local LAN with no problems. The issue I'm having is that when I try to access the Ubuntu machine from another machine on the LAN, the packets are coming in on eth0 but leaving on eth1. How can I set up a rule that ensures that all traffic for the LAN subnet ignores eth1?
routing
edited Mar 23 '16 at 18:31
mkomarinski
533211
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from serverfault.com Mar 23 '16 at 17:28
This question came from our site for system and network administrators.
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58
add a comment |
I currently have a workstation set up with two NICs on separate networks.
My current setup is this:
eth0: LAN
eth1: Outside internet
I have a default gateway set up on eth1 to reach the outside internet. I also have a route in place to set the default gateway for the LAN on eth0. I can browse the internet as well as reach the local LAN with no problems. The issue I'm having is that when I try to access the Ubuntu machine from another machine on the LAN, the packets are coming in on eth0 but leaving on eth1. How can I set up a rule that ensures that all traffic for the LAN subnet ignores eth1?
routing
edited Mar 23 '16 at 18:31
mkomarinski
533211
I currently have a workstation set up with two NICs on separate networks.
My current setup is this:
eth0: LAN
eth1: Outside internet
I have a default gateway set up on eth1 to reach the outside internet. I also have a route in place to set the default gateway for the LAN on eth0. I can browse the internet as well as reach the local LAN with no problems. The issue I'm having is that when I try to access the Ubuntu machine from another machine on the LAN, the packets are coming in on eth0 but leaving on eth1. How can I set up a rule that ensures that all traffic for the LAN subnet ignores eth1?
routing
routing
edited Mar 23 '16 at 18:31
mkomarinski
533211
edited Mar 23 '16 at 18:31
mkomarinski
533211
edited Mar 23 '16 at 18:31
mkomarinski
533211
edited Mar 23 '16 at 18:31
mkomarinski
533211
edited Mar 23 '16 at 18:31
mkomarinski
533211
533211
asked Mar 23 '16 at 17:12
ubuntu_user
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
migrated from serverfault.com Mar 23 '16 at 17:28
This question came from our site for system and network administrators.
migrated from serverfault.com Mar 23 '16 at 17:28
This question came from our site for system and network administrators.
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58
add a comment |
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58
add a comment |
1 Answer
1
active
oldest
votes
if you do not have network route for your LAN side, use this command to create one:
/sbin/route add -net 192.168.1.0/24 192.168.1.1 dev eth0
this assumes your local area network addresses are between 192.168.1.1 and 192.168.1.255 and 192.168.1.1 is your router's IP address. Your netmask is 255.255.255.0. If these are any different you will need to modify these addresses.
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f271745%2frouting-traffic-with-multiple-nics-on-ubuntu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
if you do not have network route for your LAN side, use this command to create one:
/sbin/route add -net 192.168.1.0/24 192.168.1.1 dev eth0
this assumes your local area network addresses are between 192.168.1.1 and 192.168.1.255 and 192.168.1.1 is your router's IP address. Your netmask is 255.255.255.0. If these are any different you will need to modify these addresses.
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
add a comment |
if you do not have network route for your LAN side, use this command to create one:
/sbin/route add -net 192.168.1.0/24 192.168.1.1 dev eth0
this assumes your local area network addresses are between 192.168.1.1 and 192.168.1.255 and 192.168.1.1 is your router's IP address. Your netmask is 255.255.255.0. If these are any different you will need to modify these addresses.
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
add a comment |
if you do not have network route for your LAN side, use this command to create one:
/sbin/route add -net 192.168.1.0/24 192.168.1.1 dev eth0
this assumes your local area network addresses are between 192.168.1.1 and 192.168.1.255 and 192.168.1.1 is your router's IP address. Your netmask is 255.255.255.0. If these are any different you will need to modify these addresses.
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
if you do not have network route for your LAN side, use this command to create one:
/sbin/route add -net 192.168.1.0/24 192.168.1.1 dev eth0
this assumes your local area network addresses are between 192.168.1.1 and 192.168.1.255 and 192.168.1.1 is your router's IP address. Your netmask is 255.255.255.0. If these are any different you will need to modify these addresses.
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
answered Mar 23 '16 at 17:58
MelBurslanMelBurslan
5,30011533
5,30011533
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f271745%2frouting-traffic-with-multiple-nics-on-ubuntu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
How do you know it's going out the wrong Ethernet port? Please add in some detail on what the networks look like and what your routing table is.
– mkomarinski
Mar 23 '16 at 17:58