Grub 2, Windows 10 not automatically added, manual entry not working either
Here is a link to my previous Question here asking this info, but that info is outdated as Grub did not work when I originally had Windows 7 installed. Installed Manjaro on seperate drive, Windows 7 not showing up, got frustrated, kinda broke Win7, replaced it with Win10 and now trying to get Windows 10 to show up in grub. (Windows 10 works)
So now the process. I have a bit too much distrust in installing Windows since I had it mess up my system before, as such when I Installed Windows 10 over my Win7 I physically disconnected the other drives.
- I had Windows 10 placed on a bootable USB drive with GPT partition.
- Installed Windows 10.
- Reboot into Manjaro with all drives plugged in.
- Ran
sudo grub-mkconfig
andsudo update-grub
Windows was still not found
Added custom entry in /etc/grub.d/40_custom
:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_gpt
insmod chain
set root='(hd4, msdos1)'
chainloader +1
}
With no success, Grub saying "hd4,msdos2" not found (or similar)
Rebooted into grub ran in command mode
listed off all the drives ls
Found Windows 10 was installed:
- System Reserved
(hd4,msdos1)
- C:/
(hd4,msdos2)
Browsing in grub ls (hd4,msdos2)/
The efi file was located: (hd4,msdos2)/Windows/Boot/EFI/bootmgfw.efi
Edited /etc/grub.d/40_custom
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_msdos
insmod ntfs
insmod chain
set root='(hd4, msdos2)'
chainloader /Windows/Boot/EFI/bootmgfw.efi
}
With no success, Grub saying "hd4,msdos2" not found (or similar) again...
And here I am asking for help.
I am not sure 100% but I do believe that I installed Manjaro (and Windows 10) as UEFI
sudo fdisk -l
:
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004e0a2
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005e1a9
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953520064 1953518017 931.5G 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaf87c8bd
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc443369b
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 2048 1026047 1024000 500M 7 HPFS/NTFS/exFAT
/dev/sdd2 1026048 1953521663 1952495616 931G 7 HPFS/NTFS/exFAT
Disk /dev/sde: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D018CAAD-8426-4B8A-99FB-399757F9E3DB
Device Start End Sectors Size Type
/dev/sde1 2048 9884859 9882812 4.7G EFI System
/dev/sde2 9884860 494259859 484375000 231G Linux filesystem
/dev/sde3 494259860 500118158 5858299 2.8G Linux filesystem
/dev/sde1
->/boot/efi
/dev/sde2
->/
/dev/sde3
->swap
/dev/sdc1
->/home
/etc/fstab
:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=596E-1D7B /boot/efi vfat defaults,noatime 0 2
UUID=e96e9dc6-b686-419c-8070-532b71f0631a / ext4 defaults,noatime,discard 0 1
UUID=b0dedb36-a45d-407f-be01-1da38f343149 /home ext4 defaults,commit=60,noatime 0 2
UUID=5acc3a2a-fc46-4d5d-916c-3e42f1b77141 swap swap defaults,noatime,discard 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
#windows drive
#UUID=847ACFC37ACFAFEA /mnt/windows ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
#UUID=C810D31310D306FA /mnt/windows2 ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
grub2 uefi
add a comment |
Here is a link to my previous Question here asking this info, but that info is outdated as Grub did not work when I originally had Windows 7 installed. Installed Manjaro on seperate drive, Windows 7 not showing up, got frustrated, kinda broke Win7, replaced it with Win10 and now trying to get Windows 10 to show up in grub. (Windows 10 works)
So now the process. I have a bit too much distrust in installing Windows since I had it mess up my system before, as such when I Installed Windows 10 over my Win7 I physically disconnected the other drives.
- I had Windows 10 placed on a bootable USB drive with GPT partition.
- Installed Windows 10.
- Reboot into Manjaro with all drives plugged in.
- Ran
sudo grub-mkconfig
andsudo update-grub
Windows was still not found
Added custom entry in /etc/grub.d/40_custom
:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_gpt
insmod chain
set root='(hd4, msdos1)'
chainloader +1
}
With no success, Grub saying "hd4,msdos2" not found (or similar)
Rebooted into grub ran in command mode
listed off all the drives ls
Found Windows 10 was installed:
- System Reserved
(hd4,msdos1)
- C:/
(hd4,msdos2)
Browsing in grub ls (hd4,msdos2)/
The efi file was located: (hd4,msdos2)/Windows/Boot/EFI/bootmgfw.efi
Edited /etc/grub.d/40_custom
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_msdos
insmod ntfs
insmod chain
set root='(hd4, msdos2)'
chainloader /Windows/Boot/EFI/bootmgfw.efi
}
With no success, Grub saying "hd4,msdos2" not found (or similar) again...
And here I am asking for help.
I am not sure 100% but I do believe that I installed Manjaro (and Windows 10) as UEFI
sudo fdisk -l
:
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004e0a2
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005e1a9
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953520064 1953518017 931.5G 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaf87c8bd
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc443369b
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 2048 1026047 1024000 500M 7 HPFS/NTFS/exFAT
/dev/sdd2 1026048 1953521663 1952495616 931G 7 HPFS/NTFS/exFAT
Disk /dev/sde: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D018CAAD-8426-4B8A-99FB-399757F9E3DB
Device Start End Sectors Size Type
/dev/sde1 2048 9884859 9882812 4.7G EFI System
/dev/sde2 9884860 494259859 484375000 231G Linux filesystem
/dev/sde3 494259860 500118158 5858299 2.8G Linux filesystem
/dev/sde1
->/boot/efi
/dev/sde2
->/
/dev/sde3
->swap
/dev/sdc1
->/home
/etc/fstab
:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=596E-1D7B /boot/efi vfat defaults,noatime 0 2
UUID=e96e9dc6-b686-419c-8070-532b71f0631a / ext4 defaults,noatime,discard 0 1
UUID=b0dedb36-a45d-407f-be01-1da38f343149 /home ext4 defaults,commit=60,noatime 0 2
UUID=5acc3a2a-fc46-4d5d-916c-3e42f1b77141 swap swap defaults,noatime,discard 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
#windows drive
#UUID=847ACFC37ACFAFEA /mnt/windows ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
#UUID=C810D31310D306FA /mnt/windows2 ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
grub2 uefi
add a comment |
Here is a link to my previous Question here asking this info, but that info is outdated as Grub did not work when I originally had Windows 7 installed. Installed Manjaro on seperate drive, Windows 7 not showing up, got frustrated, kinda broke Win7, replaced it with Win10 and now trying to get Windows 10 to show up in grub. (Windows 10 works)
So now the process. I have a bit too much distrust in installing Windows since I had it mess up my system before, as such when I Installed Windows 10 over my Win7 I physically disconnected the other drives.
- I had Windows 10 placed on a bootable USB drive with GPT partition.
- Installed Windows 10.
- Reboot into Manjaro with all drives plugged in.
- Ran
sudo grub-mkconfig
andsudo update-grub
Windows was still not found
Added custom entry in /etc/grub.d/40_custom
:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_gpt
insmod chain
set root='(hd4, msdos1)'
chainloader +1
}
With no success, Grub saying "hd4,msdos2" not found (or similar)
Rebooted into grub ran in command mode
listed off all the drives ls
Found Windows 10 was installed:
- System Reserved
(hd4,msdos1)
- C:/
(hd4,msdos2)
Browsing in grub ls (hd4,msdos2)/
The efi file was located: (hd4,msdos2)/Windows/Boot/EFI/bootmgfw.efi
Edited /etc/grub.d/40_custom
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_msdos
insmod ntfs
insmod chain
set root='(hd4, msdos2)'
chainloader /Windows/Boot/EFI/bootmgfw.efi
}
With no success, Grub saying "hd4,msdos2" not found (or similar) again...
And here I am asking for help.
I am not sure 100% but I do believe that I installed Manjaro (and Windows 10) as UEFI
sudo fdisk -l
:
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004e0a2
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005e1a9
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953520064 1953518017 931.5G 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaf87c8bd
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc443369b
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 2048 1026047 1024000 500M 7 HPFS/NTFS/exFAT
/dev/sdd2 1026048 1953521663 1952495616 931G 7 HPFS/NTFS/exFAT
Disk /dev/sde: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D018CAAD-8426-4B8A-99FB-399757F9E3DB
Device Start End Sectors Size Type
/dev/sde1 2048 9884859 9882812 4.7G EFI System
/dev/sde2 9884860 494259859 484375000 231G Linux filesystem
/dev/sde3 494259860 500118158 5858299 2.8G Linux filesystem
/dev/sde1
->/boot/efi
/dev/sde2
->/
/dev/sde3
->swap
/dev/sdc1
->/home
/etc/fstab
:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=596E-1D7B /boot/efi vfat defaults,noatime 0 2
UUID=e96e9dc6-b686-419c-8070-532b71f0631a / ext4 defaults,noatime,discard 0 1
UUID=b0dedb36-a45d-407f-be01-1da38f343149 /home ext4 defaults,commit=60,noatime 0 2
UUID=5acc3a2a-fc46-4d5d-916c-3e42f1b77141 swap swap defaults,noatime,discard 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
#windows drive
#UUID=847ACFC37ACFAFEA /mnt/windows ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
#UUID=C810D31310D306FA /mnt/windows2 ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
grub2 uefi
Here is a link to my previous Question here asking this info, but that info is outdated as Grub did not work when I originally had Windows 7 installed. Installed Manjaro on seperate drive, Windows 7 not showing up, got frustrated, kinda broke Win7, replaced it with Win10 and now trying to get Windows 10 to show up in grub. (Windows 10 works)
So now the process. I have a bit too much distrust in installing Windows since I had it mess up my system before, as such when I Installed Windows 10 over my Win7 I physically disconnected the other drives.
- I had Windows 10 placed on a bootable USB drive with GPT partition.
- Installed Windows 10.
- Reboot into Manjaro with all drives plugged in.
- Ran
sudo grub-mkconfig
andsudo update-grub
Windows was still not found
Added custom entry in /etc/grub.d/40_custom
:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_gpt
insmod chain
set root='(hd4, msdos1)'
chainloader +1
}
With no success, Grub saying "hd4,msdos2" not found (or similar)
Rebooted into grub ran in command mode
listed off all the drives ls
Found Windows 10 was installed:
- System Reserved
(hd4,msdos1)
- C:/
(hd4,msdos2)
Browsing in grub ls (hd4,msdos2)/
The efi file was located: (hd4,msdos2)/Windows/Boot/EFI/bootmgfw.efi
Edited /etc/grub.d/40_custom
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 10" {
insmod part_msdos
insmod ntfs
insmod chain
set root='(hd4, msdos2)'
chainloader /Windows/Boot/EFI/bootmgfw.efi
}
With no success, Grub saying "hd4,msdos2" not found (or similar) again...
And here I am asking for help.
I am not sure 100% but I do believe that I installed Manjaro (and Windows 10) as UEFI
sudo fdisk -l
:
Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004e0a2
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005e1a9
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953520064 1953518017 931.5G 83 Linux
Disk /dev/sdb: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaf87c8bd
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 234438655 234436608 111.8G 7 HPFS/NTFS/exFAT
Disk /dev/sdd: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc443369b
Device Boot Start End Sectors Size Id Type
/dev/sdd1 * 2048 1026047 1024000 500M 7 HPFS/NTFS/exFAT
/dev/sdd2 1026048 1953521663 1952495616 931G 7 HPFS/NTFS/exFAT
Disk /dev/sde: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: D018CAAD-8426-4B8A-99FB-399757F9E3DB
Device Start End Sectors Size Type
/dev/sde1 2048 9884859 9882812 4.7G EFI System
/dev/sde2 9884860 494259859 484375000 231G Linux filesystem
/dev/sde3 494259860 500118158 5858299 2.8G Linux filesystem
/dev/sde1
->/boot/efi
/dev/sde2
->/
/dev/sde3
->swap
/dev/sdc1
->/home
/etc/fstab
:
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=596E-1D7B /boot/efi vfat defaults,noatime 0 2
UUID=e96e9dc6-b686-419c-8070-532b71f0631a / ext4 defaults,noatime,discard 0 1
UUID=b0dedb36-a45d-407f-be01-1da38f343149 /home ext4 defaults,commit=60,noatime 0 2
UUID=5acc3a2a-fc46-4d5d-916c-3e42f1b77141 swap swap defaults,noatime,discard 0 2
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
#windows drive
#UUID=847ACFC37ACFAFEA /mnt/windows ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
#UUID=C810D31310D306FA /mnt/windows2 ntfs locale=en_US.utf8,dmask=022,fmask=022 0 2
grub2 uefi
grub2 uefi
edited Apr 13 '17 at 12:36
Community♦
1
1
asked Sep 18 '16 at 8:14
DrewDrew
190215
190215
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Are you using the GPT file system? EFI needs it. For "msdos1", try "gpt1."
New contributor
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f310615%2fgrub-2-windows-10-not-automatically-added-manual-entry-not-working-either%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Are you using the GPT file system? EFI needs it. For "msdos1", try "gpt1."
New contributor
add a comment |
Are you using the GPT file system? EFI needs it. For "msdos1", try "gpt1."
New contributor
add a comment |
Are you using the GPT file system? EFI needs it. For "msdos1", try "gpt1."
New contributor
Are you using the GPT file system? EFI needs it. For "msdos1", try "gpt1."
New contributor
New contributor
answered 9 mins ago
user3001834user3001834
1
1
New contributor
New contributor
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f310615%2fgrub-2-windows-10-not-automatically-added-manual-entry-not-working-either%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown