Latency doesn't work with PulseAudio on linux












4















I have two speakers. The first one is connected to a PCI card and the second one via Bluetooth. Sounds are played a little bit earlier on the PCI card so I want to add some latency. I downloaded the pulse audio GUI and I have this :



enter image description here



As you can see, I added offset of 2 seconds on the "Audio Interne" (the PCI card).



I checked with the command pactl list cards and I have this for the internal card :



Card #1

        Name: alsa_card.pci-0000_00_1b.0

        Driver: module-alsa-card.c

        Owner Module: 8

        Properties:

                alsa.card = "0"

                alsa.card_name = "HDA Intel PCH"

                alsa.long_card_name = "HDA Intel PCH at 0xf7f10000 irq 27"

                alsa.driver_name = "snd_hda_intel"

                device.bus_path = "pci-0000:00:1b.0"

                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"

                device.bus = "pci"

                device.vendor.id = "8086"

                device.vendor.name = "Intel Corporation"

                device.product.id = "1e20"

                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"

                device.form_factor = "internal"

                device.string = "0"

                device.description = "Audio interne"

                module-udev-detect.discovered = "1"

                device.icon_name = "audio-card-pci"

        Profiles:

                input:analog-stereo: Entrée Stéréo analogique (sinks: 0, sources: 1, priority: 65, available: yes)

                output:analog-stereo: Sortie Stéréo analogique (sinks: 1, sources: 0, priority: 6500, available: yes)

                output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6565, available: yes)

                output:analog-surround-21: Sortie Surround analogique 2.1 (sinks: 1, sources: 0, priority: 1300, available: yes)

                output:analog-surround-21+input:analog-stereo: Sortie Surround analogique 2.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)

                output:analog-surround-40: Sortie Surround analogique 4.0 (sinks: 1, sources: 0, priority: 1200, available: yes)

                output:analog-surround-40+input:analog-stereo: Sortie Surround analogique 4.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)

                output:analog-surround-41: Sortie Surround analogique 4.1 (sinks: 1, sources: 0, priority: 1300, available: yes)

                output:analog-surround-41+input:analog-stereo: Sortie Surround analogique 4.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)

                output:analog-surround-50: Sortie Surround analogique 5.0 (sinks: 1, sources: 0, priority: 1200, available: yes)

                output:analog-surround-50+input:analog-stereo: Sortie Surround analogique 5.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)

                output:analog-surround-51: Sortie Surround analogique 5.1 (sinks: 1, sources: 0, priority: 1300, available: yes)

                output:analog-surround-51+input:analog-stereo: Sortie Surround analogique 5.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)

                output:iec958-stereo: Sortie Stéréo numérique (IEC958) (sinks: 1, sources: 0, priority: 5500, available: yes)

                output:iec958-stereo+input:analog-stereo: Sortie Stéréo numérique (IEC958) + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 5565, available: yes)

                off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)

        Active Profile: output:analog-stereo

        Ports:

                analog-input-front-mic: Microphone avant (priority: 8500, latency offset: 0 usec, available)

                        Properties:

                                device.icon_name = "audio-input-microphone"

                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo

g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo

                analog-input-rear-mic: Microphone arrière (priority: 8200, latency offset: 0 usec, not available)

                        Properties:

                                device.icon_name = "audio-input-microphone"

                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo

g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo

                analog-input-linein: Entrée ligne (priority: 8100, latency offset: 0 usec, available)

                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo

g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo

                analog-output-lineout: Sortie ligne (priority: 9900, latency offset: 2000000 usec, available)

                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+inp

ut:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo

                analog-output-headphones: Casque audio (priority: 9000, latency offset: 2000000 usec, not available)

                        Properties:

                                device.icon_name = "audio-headphones"

                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

                iec958-stereo-output: Sortie numérique (S/PDIF) (priority: 0, latency offset: 0 usec)

                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo


And I tried to do pactl play-sample bell.ogg alsa_output.pci-0000_00_1b.0.analog-stereo. It always seems instantaneous. The latency I set doesn't seems to change anything, even when I play music.



What can I do?



EDIT



With pactl list sinks, I see this :



Latency: 2039815 usec, configured 40000 usec


So it seems the latency is set correctly but it seems to be instantaneous when I play a sound. I suppose there should be a delay. Is there something I don't understand?






pulseaudio







share|improve this question

















This question has an open bounty worth +50
reputation from Dougui ending in 6 days.


This question has not received enough attention.





















    4















    I have two speakers. The first one is connected to a PCI card and the second one via Bluetooth. Sounds are played a little bit earlier on the PCI card so I want to add some latency. I downloaded the pulse audio GUI and I have this :



    enter image description here



    As you can see, I added offset of 2 seconds on the "Audio Interne" (the PCI card).



    I checked with the command pactl list cards and I have this for the internal card :



    Card #1
    
        Name: alsa_card.pci-0000_00_1b.0
    
        Driver: module-alsa-card.c
    
        Owner Module: 8
    
        Properties:
    
                alsa.card = "0"
    
                alsa.card_name = "HDA Intel PCH"
    
                alsa.long_card_name = "HDA Intel PCH at 0xf7f10000 irq 27"
    
                alsa.driver_name = "snd_hda_intel"
    
                device.bus_path = "pci-0000:00:1b.0"
    
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    
                device.bus = "pci"
    
                device.vendor.id = "8086"
    
                device.vendor.name = "Intel Corporation"
    
                device.product.id = "1e20"
    
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
    
                device.form_factor = "internal"
    
                device.string = "0"
    
                device.description = "Audio interne"
    
                module-udev-detect.discovered = "1"
    
                device.icon_name = "audio-card-pci"
    
        Profiles:
    
                input:analog-stereo: Entrée Stéréo analogique (sinks: 0, sources: 1, priority: 65, available: yes)
    
                output:analog-stereo: Sortie Stéréo analogique (sinks: 1, sources: 0, priority: 6500, available: yes)
    
                output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6565, available: yes)
    
                output:analog-surround-21: Sortie Surround analogique 2.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
    
                output:analog-surround-21+input:analog-stereo: Sortie Surround analogique 2.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
    
                output:analog-surround-40: Sortie Surround analogique 4.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
    
                output:analog-surround-40+input:analog-stereo: Sortie Surround analogique 4.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
    
                output:analog-surround-41: Sortie Surround analogique 4.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
    
                output:analog-surround-41+input:analog-stereo: Sortie Surround analogique 4.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
    
                output:analog-surround-50: Sortie Surround analogique 5.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
    
                output:analog-surround-50+input:analog-stereo: Sortie Surround analogique 5.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
    
                output:analog-surround-51: Sortie Surround analogique 5.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
    
                output:analog-surround-51+input:analog-stereo: Sortie Surround analogique 5.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
    
                output:iec958-stereo: Sortie Stéréo numérique (IEC958) (sinks: 1, sources: 0, priority: 5500, available: yes)
    
                output:iec958-stereo+input:analog-stereo: Sortie Stéréo numérique (IEC958) + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 5565, available: yes)
    
                off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
    
        Active Profile: output:analog-stereo
    
        Ports:
    
                analog-input-front-mic: Microphone avant (priority: 8500, latency offset: 0 usec, available)
    
                        Properties:
    
                                device.icon_name = "audio-input-microphone"
    
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
    
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
    
                analog-input-rear-mic: Microphone arrière (priority: 8200, latency offset: 0 usec, not available)
    
                        Properties:
    
                                device.icon_name = "audio-input-microphone"
    
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
    
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
    
                analog-input-linein: Entrée ligne (priority: 8100, latency offset: 0 usec, available)
    
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
    
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
    
                analog-output-lineout: Sortie ligne (priority: 9900, latency offset: 2000000 usec, available)
    
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+inp
    
ut:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
    
                analog-output-headphones: Casque audio (priority: 9000, latency offset: 2000000 usec, not available)
    
                        Properties:
    
                                device.icon_name = "audio-headphones"
    
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
    
                iec958-stereo-output: Sortie numérique (S/PDIF) (priority: 0, latency offset: 0 usec)
    
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo


    And I tried to do pactl play-sample bell.ogg alsa_output.pci-0000_00_1b.0.analog-stereo. It always seems instantaneous. The latency I set doesn't seems to change anything, even when I play music.



    What can I do?



    EDIT



    With pactl list sinks, I see this :



    Latency: 2039815 usec, configured 40000 usec


    So it seems the latency is set correctly but it seems to be instantaneous when I play a sound. I suppose there should be a delay. Is there something I don't understand?






    pulseaudio







    share|improve this question

















    This question has an open bounty worth +50
    reputation from Dougui ending in 6 days.


    This question has not received enough attention.



















      4












      4








      4








      I have two speakers. The first one is connected to a PCI card and the second one via Bluetooth. Sounds are played a little bit earlier on the PCI card so I want to add some latency. I downloaded the pulse audio GUI and I have this :



      enter image description here



      As you can see, I added offset of 2 seconds on the "Audio Interne" (the PCI card).



      I checked with the command pactl list cards and I have this for the internal card :



      Card #1
      
        Name: alsa_card.pci-0000_00_1b.0
      
        Driver: module-alsa-card.c
      
        Owner Module: 8
      
        Properties:
      
                alsa.card = "0"
      
                alsa.card_name = "HDA Intel PCH"
      
                alsa.long_card_name = "HDA Intel PCH at 0xf7f10000 irq 27"
      
                alsa.driver_name = "snd_hda_intel"
      
                device.bus_path = "pci-0000:00:1b.0"
      
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
      
                device.bus = "pci"
      
                device.vendor.id = "8086"
      
                device.vendor.name = "Intel Corporation"
      
                device.product.id = "1e20"
      
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
      
                device.form_factor = "internal"
      
                device.string = "0"
      
                device.description = "Audio interne"
      
                module-udev-detect.discovered = "1"
      
                device.icon_name = "audio-card-pci"
      
        Profiles:
      
                input:analog-stereo: Entrée Stéréo analogique (sinks: 0, sources: 1, priority: 65, available: yes)
      
                output:analog-stereo: Sortie Stéréo analogique (sinks: 1, sources: 0, priority: 6500, available: yes)
      
                output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6565, available: yes)
      
                output:analog-surround-21: Sortie Surround analogique 2.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-21+input:analog-stereo: Sortie Surround analogique 2.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:analog-surround-40: Sortie Surround analogique 4.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
      
                output:analog-surround-40+input:analog-stereo: Sortie Surround analogique 4.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
      
                output:analog-surround-41: Sortie Surround analogique 4.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-41+input:analog-stereo: Sortie Surround analogique 4.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:analog-surround-50: Sortie Surround analogique 5.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
      
                output:analog-surround-50+input:analog-stereo: Sortie Surround analogique 5.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
      
                output:analog-surround-51: Sortie Surround analogique 5.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-51+input:analog-stereo: Sortie Surround analogique 5.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:iec958-stereo: Sortie Stéréo numérique (IEC958) (sinks: 1, sources: 0, priority: 5500, available: yes)
      
                output:iec958-stereo+input:analog-stereo: Sortie Stéréo numérique (IEC958) + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 5565, available: yes)
      
                off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
      
        Active Profile: output:analog-stereo
      
        Ports:
      
                analog-input-front-mic: Microphone avant (priority: 8500, latency offset: 0 usec, available)
      
                        Properties:
      
                                device.icon_name = "audio-input-microphone"
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-input-rear-mic: Microphone arrière (priority: 8200, latency offset: 0 usec, not available)
      
                        Properties:
      
                                device.icon_name = "audio-input-microphone"
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-input-linein: Entrée ligne (priority: 8100, latency offset: 0 usec, available)
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-output-lineout: Sortie ligne (priority: 9900, latency offset: 2000000 usec, available)
      
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+inp
      
ut:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
      
                analog-output-headphones: Casque audio (priority: 9000, latency offset: 2000000 usec, not available)
      
                        Properties:
      
                                device.icon_name = "audio-headphones"
      
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
      
                iec958-stereo-output: Sortie numérique (S/PDIF) (priority: 0, latency offset: 0 usec)
      
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo


      And I tried to do pactl play-sample bell.ogg alsa_output.pci-0000_00_1b.0.analog-stereo. It always seems instantaneous. The latency I set doesn't seems to change anything, even when I play music.



      What can I do?



      EDIT



      With pactl list sinks, I see this :



      Latency: 2039815 usec, configured 40000 usec


      So it seems the latency is set correctly but it seems to be instantaneous when I play a sound. I suppose there should be a delay. Is there something I don't understand?






      pulseaudio







      share|improve this question
















      I have two speakers. The first one is connected to a PCI card and the second one via Bluetooth. Sounds are played a little bit earlier on the PCI card so I want to add some latency. I downloaded the pulse audio GUI and I have this :



      enter image description here



      As you can see, I added offset of 2 seconds on the "Audio Interne" (the PCI card).



      I checked with the command pactl list cards and I have this for the internal card :



      Card #1
      
        Name: alsa_card.pci-0000_00_1b.0
      
        Driver: module-alsa-card.c
      
        Owner Module: 8
      
        Properties:
      
                alsa.card = "0"
      
                alsa.card_name = "HDA Intel PCH"
      
                alsa.long_card_name = "HDA Intel PCH at 0xf7f10000 irq 27"
      
                alsa.driver_name = "snd_hda_intel"
      
                device.bus_path = "pci-0000:00:1b.0"
      
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
      
                device.bus = "pci"
      
                device.vendor.id = "8086"
      
                device.vendor.name = "Intel Corporation"
      
                device.product.id = "1e20"
      
                device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
      
                device.form_factor = "internal"
      
                device.string = "0"
      
                device.description = "Audio interne"
      
                module-udev-detect.discovered = "1"
      
                device.icon_name = "audio-card-pci"
      
        Profiles:
      
                input:analog-stereo: Entrée Stéréo analogique (sinks: 0, sources: 1, priority: 65, available: yes)
      
                output:analog-stereo: Sortie Stéréo analogique (sinks: 1, sources: 0, priority: 6500, available: yes)
      
                output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6565, available: yes)
      
                output:analog-surround-21: Sortie Surround analogique 2.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-21+input:analog-stereo: Sortie Surround analogique 2.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:analog-surround-40: Sortie Surround analogique 4.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
      
                output:analog-surround-40+input:analog-stereo: Sortie Surround analogique 4.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
      
                output:analog-surround-41: Sortie Surround analogique 4.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-41+input:analog-stereo: Sortie Surround analogique 4.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:analog-surround-50: Sortie Surround analogique 5.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
      
                output:analog-surround-50+input:analog-stereo: Sortie Surround analogique 5.0 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1265, available: yes)
      
                output:analog-surround-51: Sortie Surround analogique 5.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
      
                output:analog-surround-51+input:analog-stereo: Sortie Surround analogique 5.1 + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 1365, available: yes)
      
                output:iec958-stereo: Sortie Stéréo numérique (IEC958) (sinks: 1, sources: 0, priority: 5500, available: yes)
      
                output:iec958-stereo+input:analog-stereo: Sortie Stéréo numérique (IEC958) + Entrée Stéréo analogique (sinks: 1, sources: 1, priority: 5565, available: yes)
      
                off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
      
        Active Profile: output:analog-stereo
      
        Ports:
      
                analog-input-front-mic: Microphone avant (priority: 8500, latency offset: 0 usec, available)
      
                        Properties:
      
                                device.icon_name = "audio-input-microphone"
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-input-rear-mic: Microphone arrière (priority: 8200, latency offset: 0 usec, not available)
      
                        Properties:
      
                                device.icon_name = "audio-input-microphone"
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-input-linein: Entrée ligne (priority: 8100, latency offset: 0 usec, available)
      
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analo
      
g-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
      
                analog-output-lineout: Sortie ligne (priority: 9900, latency offset: 2000000 usec, available)
      
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+inp
      
ut:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
      
                analog-output-headphones: Casque audio (priority: 9000, latency offset: 2000000 usec, not available)
      
                        Properties:
      
                                device.icon_name = "audio-headphones"
      
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
      
                iec958-stereo-output: Sortie numérique (S/PDIF) (priority: 0, latency offset: 0 usec)
      
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo


      And I tried to do pactl play-sample bell.ogg alsa_output.pci-0000_00_1b.0.analog-stereo. It always seems instantaneous. The latency I set doesn't seems to change anything, even when I play music.



      What can I do?



      EDIT



      With pactl list sinks, I see this :



      Latency: 2039815 usec, configured 40000 usec


      So it seems the latency is set correctly but it seems to be instantaneous when I play a sound. I suppose there should be a delay. Is there something I don't understand?






      pulseaudio




      pulseaudio






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited 7 hours ago









      user1794469

      1,3551822




      1,3551822










      asked Jan 5 at 22:27









      DouguiDougui

      541113




      541113






      This question has an open bounty worth +50
      reputation from Dougui ending in 6 days.


      This question has not received enough attention.








      This question has an open bounty worth +50
      reputation from Dougui ending in 6 days.


      This question has not received enough attention.
























          0






          active

          oldest

          votes











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "106"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f492716%2flatency-doesnt-work-with-pulseaudio-on-linux%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          0






          active

          oldest

          votes








          0






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes
















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Unix & Linux Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid …



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f492716%2flatency-doesnt-work-with-pulseaudio-on-linux%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          -

          Popular posts from this blog

          Loup dans la culture

          Image
          Loups sur une enluminure du Bestiaire d'Aberdeen Le loup est l'animal le plus emblématique de l'histoire de l'Eurasie, il était à l'honneur durant l'Antiquité chez la totalité des anciens peuples européens [ 1 ] . Sommaire 1 Le loup dans la mythologie 2 Les loups dans le folklore 2.1 L'évolution des mentalités 2.2 Le loup dans la psychanalyse 3 Le loup dans les œuvres culturelles 3.1 Le loup dans la littérature 3.1.1 Fables 3.1.2 Poésie 3.1.3 Romans 3.1.4 Littérature jeunesse 3.1.4.1 Quelques titres d'albums contemporains 3.1.5 Bande dessinée 3.2 Le loup à l'écran 3.2.1 Le cinéma et la télévision 3.2.2 Documentaires 3.2.3 Dessins animés 3.2.4 Jeux vidéo 3.3 Le loup en peinture et en sculpture 3.4 Le loup dans les œuvres musicales 4 Le loup et les noms propres 5 Bibliographie 6 Notes et références 7 Voir aussi 7.1 Articles connexes ...
          Read more

          How to solve the problem of ntp “Unable to contact time server” from KDE?

          Image
          1 0 I want to set date and time automatically but this error appears when I try to .. I'm using openSUSE, I tried different servers but it didn't work either, help please! It doesn't seem to be a network problem: $ ping pool.ntp.org 64 bytes from 41.78.128.17: icmp_seq=1 ttl=41 time=260 ms To the question of whether ntpd is installed and running: $ ps -C ntpd PID TTY TIME CMD i.e. there's no ntpd process running. $ rpm -qa | grep ntp yast2-ntp-client-3.1.12-1.7.noarch ntp-4.2.6p5-25.2.1.i586 Further information from the comments: $ sudo ntpdate pool.ntp.org 25 Sep 19:41:51 ntpdate[3162]: no server suitable for synchronization found networking kde opensuse ntp ntpd sh...
          Read more

          ASUS Zenbook UX433/UX333 — Configure Touchpad-embedded numpad on Linux

          Image
          0 1 I have an ASUS Zenbook UX433,on which ASUS decided to innovate by embedding a Numpad inside the touchpad (see picture 1). Toggling between classic touchpad mode and numpad (also turns the touchpad LEDs on) can be done through the golden button in the top-right corner of the touchpad. However, on my Manjaro arch Linux config, this behavior does not work by default and I can only use the touchpad, no numpad. Has anyone been able to configure the numpad to work on Linux, or have any idea how this could be achieved? EDIT1: I have had a look at the official Windows drivers for the UX433FA TouchPad, but was not able to make anything of it. I tried installing them on Linux using tools like NDISWrapper, but they do not detect the TouchPad/Numpad hardware, and my understanding of drivers is too limited. ...
          Read more