How can I chainload GRUB on another drive?
I have two pen drives. On one I have a full install of Arch GNU/Linux. This install is compatible with both EFI systems and BIOS systems; it has a GPT drive with a BIOS Compatibility Region and an EFI partition. GRUB2 is installed as an EFI application in the EFI partition, and it is also embedded into the BIOS Compatibility Region. On the second pen drive, I have an MBR and a FAT32 partition that fills the entire drive.
I have a BIOS computer (an XPS 13 that came preinstalled with Windows 7) that refuses to boot the GPT drive, despite the fact that I have successfully booted using the BIOS Compatibility Region on other computers. The only explanation is that there is a bug in the computer's BIOS; therefore, I've tried updating the BIOS, to no avail. I've also set the bootable flag on the Protective MBR's GPT partition - this did nothing. I've called Dell technical support, and went through 3 departments until they eventually wanted me to pay $60 to have one of their support guys help me work around a bug in their own BIOS. I declined. Because of all this, I've decided that fixing the BIOS is a dead end.
What I want to do instead is use the second pen drive to chainload the first, since if a drive has an MBR, the BIOS will boot it just fine. I don't care how this is done. It can be done using Syslinux, GRUB2, or some other specialized tool. I would prefer to not have to create another partition on the drive to house config files, but I doubt this will be possible. I've tried messing around with Syslinux's chain32 command (IIRC, that's what it's called), but it seems like this can only do stuff on the same drive. Likewise with GRUB's chainload +1. I've fiddled with all this endlessly, but with no luck. I've Googled, but haven't found anything useful.
So: how can I chainload a GRUB installation that resides on a separate drive?
grub2 boot-loader uefi syslinux
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I have two pen drives. On one I have a full install of Arch GNU/Linux. This install is compatible with both EFI systems and BIOS systems; it has a GPT drive with a BIOS Compatibility Region and an EFI partition. GRUB2 is installed as an EFI application in the EFI partition, and it is also embedded into the BIOS Compatibility Region. On the second pen drive, I have an MBR and a FAT32 partition that fills the entire drive.
I have a BIOS computer (an XPS 13 that came preinstalled with Windows 7) that refuses to boot the GPT drive, despite the fact that I have successfully booted using the BIOS Compatibility Region on other computers. The only explanation is that there is a bug in the computer's BIOS; therefore, I've tried updating the BIOS, to no avail. I've also set the bootable flag on the Protective MBR's GPT partition - this did nothing. I've called Dell technical support, and went through 3 departments until they eventually wanted me to pay $60 to have one of their support guys help me work around a bug in their own BIOS. I declined. Because of all this, I've decided that fixing the BIOS is a dead end.
What I want to do instead is use the second pen drive to chainload the first, since if a drive has an MBR, the BIOS will boot it just fine. I don't care how this is done. It can be done using Syslinux, GRUB2, or some other specialized tool. I would prefer to not have to create another partition on the drive to house config files, but I doubt this will be possible. I've tried messing around with Syslinux's chain32 command (IIRC, that's what it's called), but it seems like this can only do stuff on the same drive. Likewise with GRUB's chainload +1. I've fiddled with all this endlessly, but with no luck. I've Googled, but haven't found anything useful.
So: how can I chainload a GRUB installation that resides on a separate drive?
grub2 boot-loader uefi syslinux
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I have two pen drives. On one I have a full install of Arch GNU/Linux. This install is compatible with both EFI systems and BIOS systems; it has a GPT drive with a BIOS Compatibility Region and an EFI partition. GRUB2 is installed as an EFI application in the EFI partition, and it is also embedded into the BIOS Compatibility Region. On the second pen drive, I have an MBR and a FAT32 partition that fills the entire drive.
I have a BIOS computer (an XPS 13 that came preinstalled with Windows 7) that refuses to boot the GPT drive, despite the fact that I have successfully booted using the BIOS Compatibility Region on other computers. The only explanation is that there is a bug in the computer's BIOS; therefore, I've tried updating the BIOS, to no avail. I've also set the bootable flag on the Protective MBR's GPT partition - this did nothing. I've called Dell technical support, and went through 3 departments until they eventually wanted me to pay $60 to have one of their support guys help me work around a bug in their own BIOS. I declined. Because of all this, I've decided that fixing the BIOS is a dead end.
What I want to do instead is use the second pen drive to chainload the first, since if a drive has an MBR, the BIOS will boot it just fine. I don't care how this is done. It can be done using Syslinux, GRUB2, or some other specialized tool. I would prefer to not have to create another partition on the drive to house config files, but I doubt this will be possible. I've tried messing around with Syslinux's chain32 command (IIRC, that's what it's called), but it seems like this can only do stuff on the same drive. Likewise with GRUB's chainload +1. I've fiddled with all this endlessly, but with no luck. I've Googled, but haven't found anything useful.
So: how can I chainload a GRUB installation that resides on a separate drive?
grub2 boot-loader uefi syslinux
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
I have two pen drives. On one I have a full install of Arch GNU/Linux. This install is compatible with both EFI systems and BIOS systems; it has a GPT drive with a BIOS Compatibility Region and an EFI partition. GRUB2 is installed as an EFI application in the EFI partition, and it is also embedded into the BIOS Compatibility Region. On the second pen drive, I have an MBR and a FAT32 partition that fills the entire drive.
I have a BIOS computer (an XPS 13 that came preinstalled with Windows 7) that refuses to boot the GPT drive, despite the fact that I have successfully booted using the BIOS Compatibility Region on other computers. The only explanation is that there is a bug in the computer's BIOS; therefore, I've tried updating the BIOS, to no avail. I've also set the bootable flag on the Protective MBR's GPT partition - this did nothing. I've called Dell technical support, and went through 3 departments until they eventually wanted me to pay $60 to have one of their support guys help me work around a bug in their own BIOS. I declined. Because of all this, I've decided that fixing the BIOS is a dead end.
What I want to do instead is use the second pen drive to chainload the first, since if a drive has an MBR, the BIOS will boot it just fine. I don't care how this is done. It can be done using Syslinux, GRUB2, or some other specialized tool. I would prefer to not have to create another partition on the drive to house config files, but I doubt this will be possible. I've tried messing around with Syslinux's chain32 command (IIRC, that's what it's called), but it seems like this can only do stuff on the same drive. Likewise with GRUB's chainload +1. I've fiddled with all this endlessly, but with no luck. I've Googled, but haven't found anything useful.
So: how can I chainload a GRUB installation that resides on a separate drive?
grub2 boot-loader uefi syslinux
grub2 boot-loader uefi syslinux
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
edited Apr 21 '14 at 0:43
Braiam
23.4k1977140
23.4k1977140
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
asked Apr 21 '14 at 0:20
strugeestrugee
8,1991254102
8,1991254102
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 2 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
You won't chainload UEFI bootloader from BIOS bootloader. You can chainload a BIOS bootloader using EDK2 refind build though.
http://www.rodsbooks.com/efi-bootloaders/principles.html
http://www.rodsbooks.com/refind/
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f125716%2fhow-can-i-chainload-grub-on-another-drive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You won't chainload UEFI bootloader from BIOS bootloader. You can chainload a BIOS bootloader using EDK2 refind build though.
http://www.rodsbooks.com/efi-bootloaders/principles.html
http://www.rodsbooks.com/refind/
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
add a comment |
You won't chainload UEFI bootloader from BIOS bootloader. You can chainload a BIOS bootloader using EDK2 refind build though.
http://www.rodsbooks.com/efi-bootloaders/principles.html
http://www.rodsbooks.com/refind/
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
add a comment |
You won't chainload UEFI bootloader from BIOS bootloader. You can chainload a BIOS bootloader using EDK2 refind build though.
http://www.rodsbooks.com/efi-bootloaders/principles.html
http://www.rodsbooks.com/refind/
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
You won't chainload UEFI bootloader from BIOS bootloader. You can chainload a BIOS bootloader using EDK2 refind build though.
http://www.rodsbooks.com/efi-bootloaders/principles.html
http://www.rodsbooks.com/refind/
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
answered Apr 21 '14 at 22:33
Michael ShigorinMichael Shigorin
77259
77259
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f125716%2fhow-can-i-chainload-grub-on-another-drive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
