Compare two log files line by line and print difference
0
I have to compare two different log files line by line (in each line data between two symbols (: and ;) is to be checked) and print all lines of log 1 that are not in log 2.
If two or more lines have same set of info in log 1 then print just single line in output. I want to compare data of every line (data starting from first colon to appearance of a semicolon) irrespective whether it is a set of alphabet, numbers or special characters
Log 1
INFO @0 digrf_0_drv: Constructing a digrf Driver: digrf_0_drv; T=0
INFO @603845 mcPWM_CYC: ----- SV is waiting for FLAG 4 -----; T=603845
INFO @1116033 mcPWM_CYC: ----- SV is waiting for FLAG 0 -----; T=1116033
INFO @1145215 mcPWM_CYC: ----- Flag 0 OK SV STARTED -----; T=1145215
INFO @1145215 mcPWM_CYC: PORT STIM started !!!; T=1145215
INFO @1145287 mcPWM_CYC: ----- SV is waiting for FLAG 2 -----; T=1145287
INFO @1146281 mcPWM_CYC: ----- Flag 0 OK : SV STARTED -----; T=1146281
INFO @1146281 mcPWM_CYC: PORT STIM started !!!; T=1146281
INFO @1190554 mcPWM_CYC: C-Code exit execution. code=<aa>; T=1190554
INFO @1190554 mti_lane1_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO: Report(s) of this encapsulation run can be found under:
Log2:
UVM_INFO @1353514 reporter [Z7_COREA]: mcPWM0_ExtSig: *** START Syncronization with Verilog Stimulus ***; T=1353514
UVM_INFO @1353578 reporter [Z7_COREA]: C FLAG_SET: Setting flag 0; T=1353578
UVM_INFO @1353578 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 0; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1353578
UVM_INFO @1353642 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 0; T=1353642
UVM_INFO @1353650 reporter [Z7_COREA]: V FLAG_SET: Setting flag 1; T=1353650
UVM_INFO @1353650 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- SV is waiting for FLAG 2 -----; T=1353650
UVM_INFO @1353650 reporter [Z4_COREA]: V FLAG_WAIT: Checking flag 2, status is 0; T=1353650
UVM_INFO @1353743 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 1; T=1353743
UVM_INFO @1354063 reporter [Z7_COREA]: REM16: A=fbc00086 R=0007 E=0007 M=ffff; T=1354063
UVM_INFO @1354336 reporter [Z7_COREA]: REM16: A=fbc00080 R=048e E=048e M=ffff; T=1354336
UVM_INFO @1354532 reporter [Z7_COREA]: W16: A=fbc00080 W=008d; T=1354532
UVM_INFO @1354597 reporter [Z7_COREA]: C FLAG_SET: Setting flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Checking flag 2, status is 1; T=1354597
UVM_INFO @1354661 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 2, status is 1; T=1354661
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_CLEAR: Clearing flag 2; T=1354741
UVM_INFO @1354741 reporter [Z4_COREA]: V FLAG_SET: Setting flag 5; T=1354741
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354741
Expected Output:
Constructing a digrf Driver: digrf_0_drv
----- SV is waiting for FLAG 4 -----
----- SV is waiting for FLAG 0 -----
C-Code exit execution. code=<aa>
total bytes = 0, at time = 1190554
time window = 0, at time = 1190554
BW in Mbps = 0, at time = 1190554
Report(s) of this encapsulation run can be found under
perl
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
0
I have to compare two different log files line by line (in each line data between two symbols (: and ;) is to be checked) and print all lines of log 1 that are not in log 2.
If two or more lines have same set of info in log 1 then print just single line in output. I want to compare data of every line (data starting from first colon to appearance of a semicolon) irrespective whether it is a set of alphabet, numbers or special characters
Log 1
INFO @0 digrf_0_drv: Constructing a digrf Driver: digrf_0_drv; T=0
INFO @603845 mcPWM_CYC: ----- SV is waiting for FLAG 4 -----; T=603845
INFO @1116033 mcPWM_CYC: ----- SV is waiting for FLAG 0 -----; T=1116033
INFO @1145215 mcPWM_CYC: ----- Flag 0 OK SV STARTED -----; T=1145215
INFO @1145215 mcPWM_CYC: PORT STIM started !!!; T=1145215
INFO @1145287 mcPWM_CYC: ----- SV is waiting for FLAG 2 -----; T=1145287
INFO @1146281 mcPWM_CYC: ----- Flag 0 OK : SV STARTED -----; T=1146281
INFO @1146281 mcPWM_CYC: PORT STIM started !!!; T=1146281
INFO @1190554 mcPWM_CYC: C-Code exit execution. code=<aa>; T=1190554
INFO @1190554 mti_lane1_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO: Report(s) of this encapsulation run can be found under:
Log2:
UVM_INFO @1353514 reporter [Z7_COREA]: mcPWM0_ExtSig: *** START Syncronization with Verilog Stimulus ***; T=1353514
UVM_INFO @1353578 reporter [Z7_COREA]: C FLAG_SET: Setting flag 0; T=1353578
UVM_INFO @1353578 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 0; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1353578
UVM_INFO @1353642 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 0; T=1353642
UVM_INFO @1353650 reporter [Z7_COREA]: V FLAG_SET: Setting flag 1; T=1353650
UVM_INFO @1353650 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- SV is waiting for FLAG 2 -----; T=1353650
UVM_INFO @1353650 reporter [Z4_COREA]: V FLAG_WAIT: Checking flag 2, status is 0; T=1353650
UVM_INFO @1353743 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 1; T=1353743
UVM_INFO @1354063 reporter [Z7_COREA]: REM16: A=fbc00086 R=0007 E=0007 M=ffff; T=1354063
UVM_INFO @1354336 reporter [Z7_COREA]: REM16: A=fbc00080 R=048e E=048e M=ffff; T=1354336
UVM_INFO @1354532 reporter [Z7_COREA]: W16: A=fbc00080 W=008d; T=1354532
UVM_INFO @1354597 reporter [Z7_COREA]: C FLAG_SET: Setting flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Checking flag 2, status is 1; T=1354597
UVM_INFO @1354661 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 2, status is 1; T=1354661
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_CLEAR: Clearing flag 2; T=1354741
UVM_INFO @1354741 reporter [Z4_COREA]: V FLAG_SET: Setting flag 5; T=1354741
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354741
Expected Output:
Constructing a digrf Driver: digrf_0_drv
----- SV is waiting for FLAG 4 -----
----- SV is waiting for FLAG 0 -----
C-Code exit execution. code=<aa>
total bytes = 0, at time = 1190554
time window = 0, at time = 1190554
BW in Mbps = 0, at time = 1190554
Report(s) of this encapsulation run can be found under
perl
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
0
0
0
I have to compare two different log files line by line (in each line data between two symbols (: and ;) is to be checked) and print all lines of log 1 that are not in log 2.
If two or more lines have same set of info in log 1 then print just single line in output. I want to compare data of every line (data starting from first colon to appearance of a semicolon) irrespective whether it is a set of alphabet, numbers or special characters
Log 1
INFO @0 digrf_0_drv: Constructing a digrf Driver: digrf_0_drv; T=0
INFO @603845 mcPWM_CYC: ----- SV is waiting for FLAG 4 -----; T=603845
INFO @1116033 mcPWM_CYC: ----- SV is waiting for FLAG 0 -----; T=1116033
INFO @1145215 mcPWM_CYC: ----- Flag 0 OK SV STARTED -----; T=1145215
INFO @1145215 mcPWM_CYC: PORT STIM started !!!; T=1145215
INFO @1145287 mcPWM_CYC: ----- SV is waiting for FLAG 2 -----; T=1145287
INFO @1146281 mcPWM_CYC: ----- Flag 0 OK : SV STARTED -----; T=1146281
INFO @1146281 mcPWM_CYC: PORT STIM started !!!; T=1146281
INFO @1190554 mcPWM_CYC: C-Code exit execution. code=<aa>; T=1190554
INFO @1190554 mti_lane1_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO: Report(s) of this encapsulation run can be found under:
Log2:
UVM_INFO @1353514 reporter [Z7_COREA]: mcPWM0_ExtSig: *** START Syncronization with Verilog Stimulus ***; T=1353514
UVM_INFO @1353578 reporter [Z7_COREA]: C FLAG_SET: Setting flag 0; T=1353578
UVM_INFO @1353578 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 0; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1353578
UVM_INFO @1353642 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 0; T=1353642
UVM_INFO @1353650 reporter [Z7_COREA]: V FLAG_SET: Setting flag 1; T=1353650
UVM_INFO @1353650 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- SV is waiting for FLAG 2 -----; T=1353650
UVM_INFO @1353650 reporter [Z4_COREA]: V FLAG_WAIT: Checking flag 2, status is 0; T=1353650
UVM_INFO @1353743 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 1; T=1353743
UVM_INFO @1354063 reporter [Z7_COREA]: REM16: A=fbc00086 R=0007 E=0007 M=ffff; T=1354063
UVM_INFO @1354336 reporter [Z7_COREA]: REM16: A=fbc00080 R=048e E=048e M=ffff; T=1354336
UVM_INFO @1354532 reporter [Z7_COREA]: W16: A=fbc00080 W=008d; T=1354532
UVM_INFO @1354597 reporter [Z7_COREA]: C FLAG_SET: Setting flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Checking flag 2, status is 1; T=1354597
UVM_INFO @1354661 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 2, status is 1; T=1354661
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_CLEAR: Clearing flag 2; T=1354741
UVM_INFO @1354741 reporter [Z4_COREA]: V FLAG_SET: Setting flag 5; T=1354741
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354741
Expected Output:
Constructing a digrf Driver: digrf_0_drv
----- SV is waiting for FLAG 4 -----
----- SV is waiting for FLAG 0 -----
C-Code exit execution. code=<aa>
total bytes = 0, at time = 1190554
time window = 0, at time = 1190554
BW in Mbps = 0, at time = 1190554
Report(s) of this encapsulation run can be found under
perl
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I have to compare two different log files line by line (in each line data between two symbols (: and ;) is to be checked) and print all lines of log 1 that are not in log 2.
If two or more lines have same set of info in log 1 then print just single line in output. I want to compare data of every line (data starting from first colon to appearance of a semicolon) irrespective whether it is a set of alphabet, numbers or special characters
Log 1
INFO @0 digrf_0_drv: Constructing a digrf Driver: digrf_0_drv; T=0
INFO @603845 mcPWM_CYC: ----- SV is waiting for FLAG 4 -----; T=603845
INFO @1116033 mcPWM_CYC: ----- SV is waiting for FLAG 0 -----; T=1116033
INFO @1145215 mcPWM_CYC: ----- Flag 0 OK SV STARTED -----; T=1145215
INFO @1145215 mcPWM_CYC: PORT STIM started !!!; T=1145215
INFO @1145287 mcPWM_CYC: ----- SV is waiting for FLAG 2 -----; T=1145287
INFO @1146281 mcPWM_CYC: ----- Flag 0 OK : SV STARTED -----; T=1146281
INFO @1146281 mcPWM_CYC: PORT STIM started !!!; T=1146281
INFO @1190554 mcPWM_CYC: C-Code exit execution. code=<aa>; T=1190554
INFO @1190554 mti_lane1_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane1_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane2_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane3_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane4_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: total bytes = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: time window = 0, at time = 1190554; T=1190554
INFO @1190554 mti_lane5_bw_mon: BW in Mbps = 0, at time = 1190554; T=1190554
INFO: Report(s) of this encapsulation run can be found under:
Log2:
UVM_INFO @1353514 reporter [Z7_COREA]: mcPWM0_ExtSig: *** START Syncronization with Verilog Stimulus ***; T=1353514
UVM_INFO @1353578 reporter [Z7_COREA]: C FLAG_SET: Setting flag 0; T=1353578
UVM_INFO @1353578 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 0; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1353578
UVM_INFO @1353578 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1353578
UVM_INFO @1353642 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 0; T=1353642
UVM_INFO @1353650 reporter [Z7_COREA]: V FLAG_SET: Setting flag 1; T=1353650
UVM_INFO @1353650 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- SV is waiting for FLAG 2 -----; T=1353650
UVM_INFO @1353650 reporter [Z4_COREA]: V FLAG_WAIT: Checking flag 2, status is 0; T=1353650
UVM_INFO @1353743 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 1, status is 1; T=1353743
UVM_INFO @1354063 reporter [Z7_COREA]: REM16: A=fbc00086 R=0007 E=0007 M=ffff; T=1354063
UVM_INFO @1354336 reporter [Z7_COREA]: REM16: A=fbc00080 R=048e E=048e M=ffff; T=1354336
UVM_INFO @1354532 reporter [Z7_COREA]: W16: A=fbc00080 W=008d; T=1354532
UVM_INFO @1354597 reporter [Z7_COREA]: C FLAG_SET: Setting flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: ----- Flag 0 OK SV STARTED -----; T=1354597
UVM_INFO @1354597 reporter [testbench.top_level_module.mcPWM_CYC::main ]: PORT STIM started !!!; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354597
UVM_INFO @1354597 reporter [Z7_COREA]: V FLAG_WAIT: Checking flag 2, status is 1; T=1354597
UVM_INFO @1354661 reporter [Z7_COREA]: C FLAG_WAIT: Checking flag 2, status is 1; T=1354661
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_CLEAR: Clearing flag 2; T=1354741
UVM_INFO @1354741 reporter [Z4_COREA]: V FLAG_SET: Setting flag 5; T=1354741
UVM_INFO @1354741 reporter [Z7_COREA]: V FLAG_WAIT: Received flag 2; T=1354741
Expected Output:
Constructing a digrf Driver: digrf_0_drv
----- SV is waiting for FLAG 4 -----
----- SV is waiting for FLAG 0 -----
C-Code exit execution. code=<aa>
total bytes = 0, at time = 1190554
time window = 0, at time = 1190554
BW in Mbps = 0, at time = 1190554
Report(s) of this encapsulation run can be found under
perl
perl
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
asked 4 mins ago
Rahul AgarwalRahul Agarwal
1
1
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Rahul Agarwal is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Rahul Agarwal is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f504846%2fcompare-two-log-files-line-by-line-and-print-difference%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Rahul Agarwal is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Rahul Agarwal is a new contributor. Be nice, and check out our Code of Conduct.
Rahul Agarwal is a new contributor. Be nice, and check out our Code of Conduct.
Rahul Agarwal is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f504846%2fcompare-two-log-files-line-by-line-and-print-difference%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
