MDADM can't automount existing RAID1 array
0
I recently reformatted my system and cannot get my RAID 1 array to load on boot. Would appreciate some help figuring out why this is. Using ubuntu 14 with MDADM. Its a very simple RAID1 array consisting of 2 drives sda and sdb. I tried to edit fstab to mount the RAID but it fails at boot and asks me to press a key to skip mounting.
Here's my MDADM.conf file
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
ARRAY metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
ARRAY /dev/md/Storage(RAID) container=4e85cd11:34b3cd40:f263b2be:616ef7fb member=0 UUID=c26e7f0d:a956fc70:db00c387:58e7a99a
# This file was auto-generated on Sun, 10 Mar 2019 16:31:50 -0500
# by mkconf $Id$
Output from mdadm --Examine /dev/sda:
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 0
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from mdadm --Examine /dev/sdb:
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 1
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT gives the following:
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sdb 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sr0 1024M rom
nvme0n1 477G disk
├─nvme0n1p1 499M part
├─nvme0n1p2 99M part /boot/efi
├─nvme0n1p3 16M part
├─nvme0n1p4 237.4G part
├─nvme0n1p5 470M part
├─nvme0n1p6 232.9G part /
└─nvme0n1p9 1.9G part [SWAP]
If I run sudo mdadm --verbose --assemble --scan after boot, here is the output
mdadm: looking for devices for further assembly
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no RAID superblock on /dev/nvme0n1p9
mdadm: no RAID superblock on /dev/nvme0n1p6
mdadm: no RAID superblock on /dev/nvme0n1p5
mdadm: no RAID superblock on /dev/nvme0n1p4
mdadm: no RAID superblock on /dev/nvme0n1p3
mdadm: no RAID superblock on /dev/nvme0n1p2
mdadm: no RAID superblock on /dev/nvme0n1p1
mdadm: no RAID superblock on /dev/nvme0n1
mdadm: /dev/sdb is identified as a member of /dev/md/imsm0, slot -1.
mdadm: /dev/sda is identified as a member of /dev/md/imsm0, slot -1.
mdadm: added /dev/sda to /dev/md/imsm0 as -1
mdadm: added /dev/sdb to /dev/md/imsm0 as -1
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: looking for devices for further assembly
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: found match on member /md127/0 in /dev/md127
mdadm: Started /dev/md/Storage(RAID)_0 with 2 devices
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
mdadm: looking for devices for further assembly
mdadm: Cannot assemble mbr metadata on /dev/md/Storage_RAID__0p2
mdadm: no recogniseable superblock on /dev/md/Storage_RAID__0p1
mdadm: Cannot assemble mbr metadata on /dev/md126
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
I've made sure initramfs is updated when making changes to mdadm.conf. And once I run the --assemble --scan command, it does mount the arrays. If I then do cat /proc/mdstat I get:
md127 : inactive sdb[1](S) sda[0](S)
5032 blocks super external:imsm
md126 : active (auto-read-only) raid1 sda[1] sdb[0]
5860519936 blocks super external:/md127/0 [2/2] [UU]
But if I try to do mdadm --detail --scan to add to the mdadm.conf file I get this:
ARRAY /dev/md/imsm0 metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
mdadm: cannot open /dev/md/Storage(RAID)_0: No such file or directory
I need this array to mount at boot but have no idea what is stopping that from happening.
ubuntu raid mdadm
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
0
I recently reformatted my system and cannot get my RAID 1 array to load on boot. Would appreciate some help figuring out why this is. Using ubuntu 14 with MDADM. Its a very simple RAID1 array consisting of 2 drives sda and sdb. I tried to edit fstab to mount the RAID but it fails at boot and asks me to press a key to skip mounting.
Here's my MDADM.conf file
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
ARRAY metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
ARRAY /dev/md/Storage(RAID) container=4e85cd11:34b3cd40:f263b2be:616ef7fb member=0 UUID=c26e7f0d:a956fc70:db00c387:58e7a99a
# This file was auto-generated on Sun, 10 Mar 2019 16:31:50 -0500
# by mkconf $Id$
Output from mdadm --Examine /dev/sda:
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 0
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from mdadm --Examine /dev/sdb:
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 1
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT gives the following:
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sdb 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sr0 1024M rom
nvme0n1 477G disk
├─nvme0n1p1 499M part
├─nvme0n1p2 99M part /boot/efi
├─nvme0n1p3 16M part
├─nvme0n1p4 237.4G part
├─nvme0n1p5 470M part
├─nvme0n1p6 232.9G part /
└─nvme0n1p9 1.9G part [SWAP]
If I run sudo mdadm --verbose --assemble --scan after boot, here is the output
mdadm: looking for devices for further assembly
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no RAID superblock on /dev/nvme0n1p9
mdadm: no RAID superblock on /dev/nvme0n1p6
mdadm: no RAID superblock on /dev/nvme0n1p5
mdadm: no RAID superblock on /dev/nvme0n1p4
mdadm: no RAID superblock on /dev/nvme0n1p3
mdadm: no RAID superblock on /dev/nvme0n1p2
mdadm: no RAID superblock on /dev/nvme0n1p1
mdadm: no RAID superblock on /dev/nvme0n1
mdadm: /dev/sdb is identified as a member of /dev/md/imsm0, slot -1.
mdadm: /dev/sda is identified as a member of /dev/md/imsm0, slot -1.
mdadm: added /dev/sda to /dev/md/imsm0 as -1
mdadm: added /dev/sdb to /dev/md/imsm0 as -1
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: looking for devices for further assembly
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: found match on member /md127/0 in /dev/md127
mdadm: Started /dev/md/Storage(RAID)_0 with 2 devices
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
mdadm: looking for devices for further assembly
mdadm: Cannot assemble mbr metadata on /dev/md/Storage_RAID__0p2
mdadm: no recogniseable superblock on /dev/md/Storage_RAID__0p1
mdadm: Cannot assemble mbr metadata on /dev/md126
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
I've made sure initramfs is updated when making changes to mdadm.conf. And once I run the --assemble --scan command, it does mount the arrays. If I then do cat /proc/mdstat I get:
md127 : inactive sdb[1](S) sda[0](S)
5032 blocks super external:imsm
md126 : active (auto-read-only) raid1 sda[1] sdb[0]
5860519936 blocks super external:/md127/0 [2/2] [UU]
But if I try to do mdadm --detail --scan to add to the mdadm.conf file I get this:
ARRAY /dev/md/imsm0 metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
mdadm: cannot open /dev/md/Storage(RAID)_0: No such file or directory
I need this array to mount at boot but have no idea what is stopping that from happening.
ubuntu raid mdadm
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
0
0
0
I recently reformatted my system and cannot get my RAID 1 array to load on boot. Would appreciate some help figuring out why this is. Using ubuntu 14 with MDADM. Its a very simple RAID1 array consisting of 2 drives sda and sdb. I tried to edit fstab to mount the RAID but it fails at boot and asks me to press a key to skip mounting.
Here's my MDADM.conf file
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
ARRAY metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
ARRAY /dev/md/Storage(RAID) container=4e85cd11:34b3cd40:f263b2be:616ef7fb member=0 UUID=c26e7f0d:a956fc70:db00c387:58e7a99a
# This file was auto-generated on Sun, 10 Mar 2019 16:31:50 -0500
# by mkconf $Id$
Output from mdadm --Examine /dev/sda:
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 0
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from mdadm --Examine /dev/sdb:
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 1
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT gives the following:
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sdb 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sr0 1024M rom
nvme0n1 477G disk
├─nvme0n1p1 499M part
├─nvme0n1p2 99M part /boot/efi
├─nvme0n1p3 16M part
├─nvme0n1p4 237.4G part
├─nvme0n1p5 470M part
├─nvme0n1p6 232.9G part /
└─nvme0n1p9 1.9G part [SWAP]
If I run sudo mdadm --verbose --assemble --scan after boot, here is the output
mdadm: looking for devices for further assembly
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no RAID superblock on /dev/nvme0n1p9
mdadm: no RAID superblock on /dev/nvme0n1p6
mdadm: no RAID superblock on /dev/nvme0n1p5
mdadm: no RAID superblock on /dev/nvme0n1p4
mdadm: no RAID superblock on /dev/nvme0n1p3
mdadm: no RAID superblock on /dev/nvme0n1p2
mdadm: no RAID superblock on /dev/nvme0n1p1
mdadm: no RAID superblock on /dev/nvme0n1
mdadm: /dev/sdb is identified as a member of /dev/md/imsm0, slot -1.
mdadm: /dev/sda is identified as a member of /dev/md/imsm0, slot -1.
mdadm: added /dev/sda to /dev/md/imsm0 as -1
mdadm: added /dev/sdb to /dev/md/imsm0 as -1
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: looking for devices for further assembly
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: found match on member /md127/0 in /dev/md127
mdadm: Started /dev/md/Storage(RAID)_0 with 2 devices
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
mdadm: looking for devices for further assembly
mdadm: Cannot assemble mbr metadata on /dev/md/Storage_RAID__0p2
mdadm: no recogniseable superblock on /dev/md/Storage_RAID__0p1
mdadm: Cannot assemble mbr metadata on /dev/md126
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
I've made sure initramfs is updated when making changes to mdadm.conf. And once I run the --assemble --scan command, it does mount the arrays. If I then do cat /proc/mdstat I get:
md127 : inactive sdb[1](S) sda[0](S)
5032 blocks super external:imsm
md126 : active (auto-read-only) raid1 sda[1] sdb[0]
5860519936 blocks super external:/md127/0 [2/2] [UU]
But if I try to do mdadm --detail --scan to add to the mdadm.conf file I get this:
ARRAY /dev/md/imsm0 metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
mdadm: cannot open /dev/md/Storage(RAID)_0: No such file or directory
I need this array to mount at boot but have no idea what is stopping that from happening.
ubuntu raid mdadm
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I recently reformatted my system and cannot get my RAID 1 array to load on boot. Would appreciate some help figuring out why this is. Using ubuntu 14 with MDADM. Its a very simple RAID1 array consisting of 2 drives sda and sdb. I tried to edit fstab to mount the RAID but it fails at boot and asks me to press a key to skip mounting.
Here's my MDADM.conf file
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
ARRAY metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
ARRAY /dev/md/Storage(RAID) container=4e85cd11:34b3cd40:f263b2be:616ef7fb member=0 UUID=c26e7f0d:a956fc70:db00c387:58e7a99a
# This file was auto-generated on Sun, 10 Mar 2019 16:31:50 -0500
# by mkconf $Id$
Output from mdadm --Examine /dev/sda:
/dev/sda:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 0
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from mdadm --Examine /dev/sdb:
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 96f17bdd
Family : 96f17bdd
Generation : 000bd2b7
Attributes : All supported
UUID : 4e85cd11:34b3cd40:f263b2be:616ef7fb
Checksum : 7eee6b4f correct
MPB Sectors : 1
Disks : 2
RAID Devices : 1
Disk01 Serial : ZAD05L4F
State : active
Id : 00000006
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
[Storage(RAID)]:
UUID : c26e7f0d:a956fc70:db00c387:58e7a99a
RAID Level : 1
Members : 2
Slots : [UU]
Failed disk : none
This Slot : 1
Array Size : 11721039872 (5589.03 GiB 6001.17 GB)
Per Dev Size : 11721040136 (5589.03 GiB 6001.17 GB)
Sector Offset : 0
Num Stripes : 45785312
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : normal
Dirty State : clean
Disk00 Serial : ZAD04VWC
State : active
Id : 00000004
Usable Size : 11721040136 (5589.03 GiB 6001.17 GB)
Output from lsblk -o NAME,SIZE,FSTYPE,TYPE,MOUNTPOINT gives the following:
NAME SIZE FSTYPE TYPE MOUNTPOINT
sda 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sdb 5.5T disk
└─md126 5.5T raid1
├─md126p1 128M md
└─md126p2 5.5T md
sr0 1024M rom
nvme0n1 477G disk
├─nvme0n1p1 499M part
├─nvme0n1p2 99M part /boot/efi
├─nvme0n1p3 16M part
├─nvme0n1p4 237.4G part
├─nvme0n1p5 470M part
├─nvme0n1p6 232.9G part /
└─nvme0n1p9 1.9G part [SWAP]
If I run sudo mdadm --verbose --assemble --scan after boot, here is the output
mdadm: looking for devices for further assembly
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no RAID superblock on /dev/nvme0n1p9
mdadm: no RAID superblock on /dev/nvme0n1p6
mdadm: no RAID superblock on /dev/nvme0n1p5
mdadm: no RAID superblock on /dev/nvme0n1p4
mdadm: no RAID superblock on /dev/nvme0n1p3
mdadm: no RAID superblock on /dev/nvme0n1p2
mdadm: no RAID superblock on /dev/nvme0n1p1
mdadm: no RAID superblock on /dev/nvme0n1
mdadm: /dev/sdb is identified as a member of /dev/md/imsm0, slot -1.
mdadm: /dev/sda is identified as a member of /dev/md/imsm0, slot -1.
mdadm: added /dev/sda to /dev/md/imsm0 as -1
mdadm: added /dev/sdb to /dev/md/imsm0 as -1
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: looking for devices for further assembly
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: found match on member /md127/0 in /dev/md127
mdadm: Started /dev/md/Storage(RAID)_0 with 2 devices
mdadm: looking for devices for further assembly
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
mdadm: looking for devices for further assembly
mdadm: Cannot assemble mbr metadata on /dev/md/Storage_RAID__0p2
mdadm: no recogniseable superblock on /dev/md/Storage_RAID__0p1
mdadm: Cannot assemble mbr metadata on /dev/md126
mdadm: /dev/sdb is busy - skipping
mdadm: /dev/sda is busy - skipping
mdadm: cannot open device /dev/sr0: No medium found
mdadm: no recogniseable superblock on /dev/nvme0n1p9
mdadm: no recogniseable superblock on /dev/nvme0n1p6
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p5
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p4
mdadm: no recogniseable superblock on /dev/nvme0n1p3
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p2
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1p1
mdadm: Cannot assemble mbr metadata on /dev/nvme0n1
mdadm: looking in container /dev/md127
mdadm: member /md127/0 in /dev/md127 is already assembled
I've made sure initramfs is updated when making changes to mdadm.conf. And once I run the --assemble --scan command, it does mount the arrays. If I then do cat /proc/mdstat I get:
md127 : inactive sdb[1](S) sda[0](S)
5032 blocks super external:imsm
md126 : active (auto-read-only) raid1 sda[1] sdb[0]
5860519936 blocks super external:/md127/0 [2/2] [UU]
But if I try to do mdadm --detail --scan to add to the mdadm.conf file I get this:
ARRAY /dev/md/imsm0 metadata=imsm UUID=4e85cd11:34b3cd40:f263b2be:616ef7fb
mdadm: cannot open /dev/md/Storage(RAID)_0: No such file or directory
I need this array to mount at boot but have no idea what is stopping that from happening.
ubuntu raid mdadm
ubuntu raid mdadm
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 7 hours ago
ccac3ccac3
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 7 hours ago
ccac3ccac3
1
asked 7 hours ago
ccac3ccac3
1
1
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
ccac3 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
ccac3 is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f505540%2fmdadm-cant-automount-existing-raid1-array%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
ccac3 is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
ccac3 is a new contributor. Be nice, and check out our Code of Conduct.
ccac3 is a new contributor. Be nice, and check out our Code of Conduct.
ccac3 is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f505540%2fmdadm-cant-automount-existing-raid1-array%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
